HP小型机MP易使用手册.docVIP

第二章 访问MP 可以通过MP serial port 或者MP LAN port 登陆MP，默认的用户名/口令为：Admin/Admin 登陆过程： ************************************************************************* This is a private system. Do not attempt to login unless you are an authorized user. Any authorized or unauthorized access or use may be monitored and can result in criminal or civil prosecution under applicable law. ************************************************************************* ************************************************************************* Only default users are configured. Use one of the following user/password pairs to login: Admin/Admin Oper/Oper ************************************************************************* MP login: Admin MP password: ***** Hewlett-Packard Integrated Lights-Out HP Integrity and HP 9000 (c) Copyright Hewlett-Packard Company 1999-2004. All Rights Reserved. MP Host Name: mp-rx2620 Revision E.03.15 ************************************************************************* MP ACCESS IS NOT SECURE Default MP users are currently configured and remote access is enabled. Modify default users passwords or delete default users (see UC command) OR Disable all types of remote access (see SA command) ************************************************************************* ************************************************************************* Your Certificate is expired. Use the SO command to generate a new certificate. ************************************************************************* MP MAIN MENU: CO: Console VFP: Virtual Front Panel CM: Command Menu CL: Console Log SL: Show Event Logs CSP: Connect to Service Processor SE: Enter OS Session HE: Main Help Menu X: Exit Connection 2.1 serial port 使用任意终端仿真软件通过主机专用的串口线连接，具体设置为 2.2 MP LAN port 通过网线连接，直接telnet MP LAN port 的IP 地址 第三章 常用命令 注意：MP里的一些命令将对正在运行的系统造成破坏性影响，请不要随意操作，必须在响应中心工程