10级钳电班《力拖动控制线路与技能训练》授课计划表.docVIP

教学（实习）授课计划 授课班级 2010年《钳电一班 》 授课名称 电工基础 授课教师 李剑平 授课时间 2011.3.1 至 20012.1 使用教材 全国中等职业技术电工类专业通用教材 培 训 中 心 授 课 计 划 说 明 学生现状分析： 学生都是今年招进校的初中毕业生，通过上学期的电工基础教学，发现理论基础普遍较差。 本课程教学目的和要求： 1、了解电器元件结构、工作原理 2、掌握控制电路工作原理 3、熟练绘制电路图 4、了解装配工艺知识，熟练地按电路图安装接线 5、电动机基本控制电路安装、配线 6、排除简单电气故障 授课的重点和难点： 重点： 1.掌握控制电路工作原理 2．电动机基本控制电路安装，配线。 难点： 电动机基本控制电路安装，配线。 2．排除简单电气故障 四、本课程确保教学质量的措施： 1．教学中要贯切”精讲，多练”的原则 2充分利用仪器进行演示教学 3作业要精选 4加强”反馈”式教学 shall not exceed the level of stator core, or arc skateboards, protection of stator plate rollover may occur), reasonable to generally should be centralized. Avoid layout vulnerable to mechanical damage, damp, vulnerable to corrosion and vibration, ensure as far as possible with the platform stairs, lifting devices, cover plates, electrical enclosures and other intervals at arms length. Piping support and hanger set weight of the weight and its insulation shall meet reasonable piping displacement, increase system stability, prevention of pipeline vibration displacement in operation. Process piping support and hanger spacing are shown in table 1. Process piping in the drain pipe must have a certain slope (about 0.002-0.004) to drain. Enter the pipe should be smooth flow to the lateral, intake manifold into the expansion tank should be considered order, low pressure or high pressure drop near the expansion tank inlet. Pipe deflection and expansion must be considered the absorption problem, consider the natural direction of the pipeline using the small pipe to achieve thermal expansion compensation and, if necessary, consider shall not exceed the level of stator core, or arc skateboards, protection of stator plate rollover may occur), reasonable to generally should be centralized. Avoid layout vulnerable to mechanical damage, damp, vulnerable to corrosion and vibration, ensure as far as possible with the platf