UG NX8如创建和打开中文名称的部件.docVIP

UG NX8如何创建和打开中文名称的部件 发表时间:2011-09-08 17:15 来源:本站原创 作者:Ace 点击: 本节教程主要教大家如何设置UG8.0环境变量,使UG8.0文件爱成中文显示 这里我们以XP系统为例 第一步 鼠标右键点击“我的电脑”选择属性选项，出现系统属性栏，如图所示： ? 第二步 在高级选项下选择环境变量，出现环境变量对话框，如图所示： ? ? 第三步 在环境变量对话框下选择环境变量的新建选项，出现新建系统变量对话框，如图： ? ? 第四步 在变量名这栏输入ugii_utf8_mode，在变量值栏输入1，然后点击确定，UG8.0设置文件名称为中文完成，如图所示： ? ? 第五步 运行UG软件，选择拉伸命令创建一个长方体，选择文件—保存，在文件名处，输入“长方体”这个名字，如图所示： ? ? 点击确定后，关闭我们创建的界面，选择打开命令，打开我们创建的长方体，如图所示： ? ? win7系统如何找环境变量 第一步 鼠标右键选择我的电脑，选择属性，出现对话框，如图所示： ? ? 第二步 在对话框左面选择高级系统设置选项，如图所示： ? ? 出现系统属性对话框，在这里选择环境变量，然后设置环境变量，方法和上面XP系统相同，我们就不展示了，如图所示： ? ships of 72 and a half the Harbour, like room Tao Yuan. Triangle at the cemetery (Shanghai, Nanjing and Hangzhou), and the small triangle (Soviet Union, Ka, Lake) where the hinterland, at the junction of Jiangsu, East, South and west sides respectively, and jiaxing in Zhejiang Province, Wuzhen, Nanxun town and connected. After the liberation, 17 townships, Yan Tomb, provided there is a town, District Administration had in town. A unique geographical environment, has become the militarys battleground. On November 5, 1937, Japan 10th army landed in Hangzhou Bay, North Bay, on November 12, Shanghai fell. Part of the Japanese army to the North along the flood of jiaxing railway, Jiujiang road, invaded Wu Jiang. On November 18, the Japanese army occupied Wujiang city. Stationed in Wujiangs ships of 72 and a half the Harbour, like room Tao Yuan. Triangle at the cemetery (Shanghai, Nanjing and Hangzhou), and the small triangle (Soviet Union, Ka, Lake) where the hinterland, at the junction of Jiangsu, East, South and west sides respectively, and jiaxing in Zhejiang Province, Wuzhen, Nanxun town and connected. After the liberation, 17 townships, Yan Tomb, provided there is a town, District Administration had in town. A unique geographical environment, has become the militarys battleground. On November 5, 1937, Japan 10th army landed in Hangzhou Bay, North Bay, on November 12, Shanghai fell. Part of the Japanese