11月23日爱讲堂活动总结.docVIP

11月23日下午2点开设了爱车讲堂活动，我们特邀请了资深讲师讲解爱车的保养、维修及日常安全检查有关知识，而且是在车间现车操作车辆现场讲解。 在一个阳光明媚的下午，我们的爱车讲堂活动就要正式开始了，在我们可爱的主持人的带领下，轻松愉快的活动正式拉开了序幕。   认真专业的技师在讲解如何解决控油问题，车主们都目不转睛了！  对车感兴趣的车主们忍不住自己动手实践啦！ 整个活动都处在一个轻松愉快的学习气氛当中~~~  爱车养护讲堂在一种欢快的气氛中拉下了序幕，大家一起来合影啦，“深业丰田甜不甜，甜！”  本次活动圆满的结束啦，大家还意犹未尽呢！通过这次活动，充分的体现了我们对车主的认真负责，也增进了车主与我们之间的距离，让车主更了解我们深业丰田，提高了我们的责任感，使命感，拥有高质量，高技术，是我们的初衷，同时我们也会更加的提高售后的服务，让车主朋友进店有一种宾至如归的感觉！ 公司地址：新余市新欣北大道新长途汽车站内 销售热线：0790-6288988 服务热线：0790-6652999 官方网站： 新浪微博：/FTQC 微信号：XY-TOYOTA requirements must be approved by the rust, straightening the enclosure base of production and installation. Channel #8 channel. 6.1.2 Basic steel cutting electric cutting tools should be used, gas cutting and welding is not allowed. Incision should be flat and without burrs, feeding upon completion should be embalmed. 6.1.3 Foundation Installation requirements must be approved by the rust, straightening the enclosure base of production and installation. Channel #8 channel. 6.1.2 Basic steel cutting electric cutting tools should be used, gas cutting and welding is not allowed. Incision should be flat and without burrs, feeding upon completion should be embalmed. 6.1.3 Foundation Installation requirements must be approved by the rust, straightening the enclosure base of production and installation. Channel #8 channel. 6.1.2 Basic steel cutting electric cutting tools should be used, gas cutting and welding is not allowed. Incision should be flat and without burrs, feeding upon completion should be embalmed. 6.1.3 Foundation Installation