Folie1-GermanGlobalTradeForumBerlin.ppt

GLOBAL + PARTNER SUSTAINABLE RISK MANAGEMENT Use of waste heat or sun power and their transformation into cooling and useable heat Basic idea 基础思想 In the context of industrial manufacturing processes as well as various other procedures often very high temperatures are needed. The resulting waste heat must be exhausted in some form, which regularly takes place via delivery to the surrounding without further use of the inherent energy.工业生产过程中往往需要非常高的温度生产，由此产生的余热必须用尽以某种形式排放出来，而目前往往直接排放未加任何利用 Beyond that often a cooling is within defined manufacturing process steps, necessary from plants, components or closed area etc. Furthermore, there is often demand for cooling within defined manufacturing processes, plants, components or enclosed areas etc. 不仅如此， 在生产系统内部还额外需要一个制冷系统。 In the context of operating own power stations, likewise high temperature waste heat emerges, with the need for exhaustion. 发电站产生的热能也需要 释放 The adsorption process presented here uses the developing waste heat and makes the following functions available: 我们的吸附程序就是缘于利用工业余热来实现能源再利用 Transformation of the waste heat energy in cold or heat at the same time or another as well as at the same place or another 利用废热能同时制冷或供热 Storage of the waste heat energy 储存废热 Supply of cold e.g. for the cooling of plants, components, tools, buildings etc.为工业民用制冷 _ Supply of useable heat e.g. for the heating, warm water preparation or preliminary heating of media in the context of the manufacturing 利用废热进行初级预热。 It creates further a basis for the pipeline-independent distribution of cold and warmth. 通过管道传输独立供暖和制冷 pump zeolith-reaktor condenser pump Evaporator valve valve fluid- cooling pump cold Waste heat valve pump valve heat pump Cooling and heating gain from waste heat Gas burner Principle of energy flows Potential of Adsorpt