WLC2504控制器配置.docVIP

3.1 WLC 2504初始化配置 WLC 2504初始化配置如下所示： Would you like to terminate autoinstall? [yes]: yes System Name [Cisco_ac:ca:42] 31 characters max : AUTO-INSTALL: process terminated -- no configuration loaded Enter Administrative User Name 24 characters max : admin Enter Administrative Password 3 to 24 characters : ******** Re-enter Administrative Password : ******** Enable Link Aggregation LAG [yes][NO]: no Management Interface IP Address: 192.168.0.1 Management Interface Netmask: 255.255.255.0 Management Interface Default Router: 192.168.0.254 Management Interface VLAN Identifier 0 untagged : Management Interface Port Num [1 to 4]: 1 Management Interface DHCP Server IP Address: 192.168.0.1 Virtual Gateway IP Address: 1.1.1.1 Multicast IP Address: 225.225.255.255 Mobility/RF Group Name: 8F-WIFI Network Name SSID : IC-Guest Configure DHCP Bridging Mode [yes][NO]: no Allow Static IP Addresses [YES][no]: yes Configure a RADIUS Server now? [YES][no]: no Warning! The default WLAN security policy requires a RADIUS server. Please see documentation for more details. Enter Country Code list enter help for a list of countries [US]: CN Enable 802.11b Network [YES][no]: yes Enable 802.11a Network [YES][no]: yes Enable 802.11g Network [YES][no]: yes Enable Auto-RF [YES][no]: yes Configure a NTP server now? [YES][no]: no Configure the system time now? [YES][no]: yes Enter the date in MM/DD/YY format: 03/28/14 Enter the time in HH:MM:SS format: 13:45:40 Configuration correct? If yes, system will save it and reset. [yes][NO]: yes Configuration saved! Resetting system with new configuration... Restarting system. 初始化设置完成后系统自动保存并重启，WLC启动完成，输入初始化设置的用户名和密码，登录设备，查看设备状态。 Cisco Controller show port summary STP Admin Physical Physical Link Link Pr Type Stat Mode Mode Status Status Trap POE -- 1 Normal Forw Enable Auto 1000 Full Up Enable N/A 2 Normal Disa Enable Auto Auto Down Enable N/A 3 Normal Disa Enable Auto Auto Down Enable Enable 4