压力传感器程序.docVIP

#include #include #include #include #define uchar unsigned char #define uint unsigned int #define BUSY 0x80 //常量定义 #define DATAPORT P0 //ADC0832的引脚 sbit ADCS =P3^5; //ADC0832 chip seclect sbit ADDI =P3^7; //ADC0832 k in sbit ADDO =P3^7; //ADC0832 k out sbit ADCLK =P3^6; //ADC0832 clock signal sbit LCM_RS=P2^0; sbit LCM_RW=P2^1; sbit LCM_EN=P2^2; uchar ad_data; //采样值存储 sbit Alarm_led_red =P1^5; //超过压力表量程最大值红色led报警定义 sbit Alarm_led_green=P1^6; //低于压力表量程最小值绿色led报警定义 //adc采样值存储单元 char press_data; //标度变换存储单元 unsigned char ad_alarm; //报警值存储单元 unsigned char press_bai=0; //显示值百位 unsigned char press_shi=0; //显示值十位 unsigned char press_ge=0; //显示值个位 unsigned char press_dot=0; //显示值十分位 uchar code str0[]={Press: . kpa }; uchar code str1[]={ Check BY Jack }; void delay(uint); void lcd_wait(void); void delay_LCM(uint); //LCD延时子程序 void initLCM( void); //LCD初始化子程序 void lcd_wait(void); //LCD检测忙子程序 void WriteCommandLCM(uchar WCLCM,uchar BusyC); //写指令到ICM子函数 void WriteDataLCM(uchar WDLCM); //写数据到LCM子函数 void DisplayOneChar(uchar X,uchar Y,uchar DData); //显示指定坐标的一个字符子函数 void DisplayListChar(uchar X,uchar Y,uchar code *DData); //显示指定坐标的一串字符子函数 void display(void); //系统显示子函数 uchar Adc0832(unsigned char channel);