电焊作业安全守则.docVIP

电焊作业安全操作守则 所有的现场工人: 为保证现场，在工地的任何时间都必须严格遵守全守则。不能免除您遵守当地相关法律及法规的义务 以下安全守则必须牢记并严格遵守： 所有电焊作业之前必须获得经签字确认的热作业施工许可，并将许可张贴在现场； 所有电焊作业现场需要明确标识，并与周围场地分隔开来。在任何时间都要保证现场良好的文明施工面貌； 所有电焊作业现场需要有清洁明确的进出通道和应急逃生通道； 所有电焊作业现场需要充足和稳定的照明； 所有电焊作业现场必须有灭火器； 在封闭、半封闭的空间内进行电焊作业，必须开启通风设备； 电焊作业必须使用电焊面罩或电焊头盔、电焊手套、防护服、防护鞋； 使用电焊机必须保证用电安全，电焊机箱体必须良好接地，所有设备经检查不存在漏电风险，所有电线悬挂在2米的高度； 电焊作业现场应干燥，地面积水的情况下，不得从事电焊作业，搭铁线、焊把线不得浸没在水中。 严禁在可燃物存放区域进行电焊作业； 开始作业之前要对设备情况和现场状况进行检查，确保没有安全隐患后开始作业； 项目经理： 雅益轩项目公司 Hot Work Safety Rules To All Workers: Hot works include welding, cutting and burning work on site. To ensure safety of hot works, you must strictly comply with following hot work safety rules at any time. This requirement will not free of your obligations to follow focal statutory stipulations our safety and health as and when required when they apply. BASIC HOT WORK SAFETY RULES MUST BE REMEMBERED AND COMPLIED WITH: Only competent workers who have attended be-monthly refresh training can work on welding, cutting and burning works. Before any hot work is carried out, the Hot Work Permit To Work must be agreed and signed by MGKT, and displayed on site. Hot work site shall have specific signage, and separated from public area with physical barriers. Good housekeeping should be maintained at any time. Hot work site shall have clear access and emergency escape access. Sufficient and stable illumination should be provided for any hot work. There must be fire extinguisher at hot work sites. Ventilation equipment must be provided for hot work in confined space. Welding mask, helmet, special gloves, protective clothes and safety shoes must be used in welding work. Protective mask, special gloves, protective clothes and safety shoes must be used in oxy-acetylene cutting. All oxy-acetylene gas cylinders and burning torches must be with flash back arrestor or non-return valve. Metal cutting must use special equipment. Measures shall be taken to prevent sparks. All equipment and tools used in hot work must have tags of ins