压线模.ppt

Sizes available as follows 0.56 – 2.7mm channel width, 7mm base (24m per box) 3.00- 6.3mm channel width, 12mm base (12m per box) Additional ranges are also available Extra deep (1.3 – 5.0mm) Off Centre (0.8 – 1.5mm) Multicrease (Buff, White and Yellow avalible in centre to centre 3.0, 3.5, 4.0 and 5.0mm on a 9.5mm Base） Reverse Bend (RB1 – RB6) 12mm base The first matrix patented by us in 1950s Steel base makes it very durable Used mostly on hand fed machines and cylinders and in some cases auto plattens Reverse Bend Sizes available as follows 0.6 – 3.0mm channel width, 8.75mm base 3.2 – 3.5mm channel width, 12mm base 4.0 and above channel width, 15mm base An additional range of 12mm wide base from 0.6 to 3.5mm channel width is also available. 20mm Base specially designed for use with corrugated box making and point of sale products. Wide base lessens impression in carton Keeps to single crease especially when with Flute Available 2.7-10mm channel widths in various rule fits LARGE Moulded plastic matrix with film base Our biggest seller worldwide Channel regarded as the best quality plastic matrix worldwide Result of 50 years development50 low cost but excellent performance Strong tape was originally introduced for use on 1mm plates and is very effective in hot and humid climates This product is part of the XTC family where it is has a 12mm base (0.6-3.5mm) channel widths, for 4mm and above channel widths the base is 15mm wide. Strong tape is used throughout the range Sizes available as follows 0.6 – 3.5 Channel width, use 12mm Base (available in 36m boxes or reels) 4.0 and above channel width, use 15mm Base (available in 30m boxes or reels) Also available in Trax Plus ‘S’ (8.75mm Base, 0.8-2.1mm channel width) Off Centre (O/C) Internal Chamfer (I/C) Pressboard matrix Shoulders are made of fibre material Fibre material is easier to chamfer Particularly useful when finishing and chamfering is preferred, especially when producing multiple