“感念师恩 荣母校”成功学子报告会盛大举行.docVIP

“感念师恩 荣耀母校”成功学子报告会盛大举行 “感念师恩 荣耀母校”成功学子报告会隆重举行 2015年7月21日上午，以“感念师恩 荣耀母校”为主题的成功学子报告会在学校4S创业示范店盛大举行。 时光不老，青春不散，上午10点，2位成功学子荣归母校。一进校园，再次看到昔日的班主任，他们亲切地上前与恩师握手拥抱。匆匆离别后，转眼已数载，重回母校，虽然熟悉中有着陌生，感叹着学校变化之大，但不变的是师生间永远有着道不完的话语和情愫。 作为师者，最大的幸福便是看到学生毕业踏入社会之后，为自己的人生交上了一份满意的答卷。现如今2位成功学子中，一位是月薪过万的企业高管，一位是凭借精湛技术自主创业的成功人士。 创业学子刘泽平分享创业心得企业高管路鸿鹏结合自身经历分享就业心得在校学子与学哥互动 equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power