JS500型混凝土搅拌机设计-搅拌系统设计（含全套CAD图纸）.doc

买文档送CAD图纸，QQ 摘 要 本次设计的是JS500混凝土搅拌机的搅拌系统。其中JS500混凝土搅拌机是强制式卧轴混凝土搅拌机中的一种，强制式混凝土搅拌机不仅能搅拌干硬性混凝土，而且能搅拌轻骨料混凝土，能使混凝土达到强烈的搅拌作用，搅拌非常均匀，生产率高，质量好，成本低。它是目前国内较为新型的搅拌机，整机结构紧凑、外型美观。搅拌装置作为该机型的核心部分，直接影响着整机的混凝土搅拌质量和效率。根据双卧轴搅拌机的结构特点，分析了搅拌装置的结构特点，确定了搅拌系统设计方案，并完成搅拌筒、搅拌轴以及搅拌叶片的设计。 首先，通过计算确定搅拌筒的外形尺寸，确定端板的的结构，选择加强筋。然后，确立搅拌装置的尺寸并计算搅拌功率，接着校核轴和键。最后设计轴端密封装置及其零件并校核轴承寿命。 关键词：混凝土搅拌机，搅拌系统，搅拌筒，搅拌轴 Abstract The design of the mixing system is concrete mixer JS500. And concrete mixer JS500 is compulsory horizontal axis in a concrete mixer, compulsory mixing concrete mixer can not only dry hard concrete, but also stirred lightweight aggregate concrete, concrete can achieve a strong role in stirring, stirring very uniform, high productivity, quality Low cost.It is a new type of domestic mixer with two compact structure, good looks. Mixing device as a core part of the model and directly affects the whole quality and efficiency of the concrete mixing. According to the structural characteristics of twin-shaft mixer and analysis of the structural characteristics of the mixing device, determine the design of the mixing system and complete the mixing tube, stirring shaft and stirring blade design. First, through the calculate and determine the overall size mixing tube, determine the structure of the board, the choice to strengthen. Then, establish the size of the device and calculation of mixing power, then check axis and the key. Finally the shaft sealing device design and its parts and checked bearing life. Keyword: concrete-mixer，mixing system, the mixing tube, mixing shaft  目录 1、绪论 1 1.1 搅拌机概述 1 1.2 设计原则 2 1.3 整机总体设计要求 2 1.4 原始数据 2 2、设计的主要内容 3 2.1 搅拌装置 3 2.2 搅拌传动系统 5 3、搅拌筒的设计 7 3.1设计总说明 7 3.2搅拌筒的总体设计 7 3.2.1 容积利用系数 7 3.2.2 长径比的确定 7 3.2.3 长宽比确定 8 3.2.4 计算得出搅拌筒的直径、长度、宽度 8 3.3 选择材料 8 3.4 端板的设计 9 3.4.1 端板的结构确定 9 3.4.2 端板留安装法兰的孔 10 3.4.3 加强筋结构和位置的确定 10 3.5 筒体的设计 11 3.5.1 筒体总长度的确定 11 3.5.2 筒体内径和外径的确定 11 3.6衬板的设计 12 3.6.1端面衬板的设计 12 3.6.2 圆弧衬板的设计 14 3.6.3 直衬板的设计 15 3