母排温度监控报警系统论文.docVIP

母排温度监控报警系统 学生姓名： 学生学号： 院 （系）： 电气信息工程学院 年级专业： 指导教师： 助理指导教师： 二〇一五年五月  摘 要 随着社会的发展和科学的进步，温度检测的重要性在各个方面也越来越明显。温度检测与监控的技术与设备已普遍应用在生活的每一个行业当中，市场上的产品也是层出不穷。温度检测及显示也逐渐的采用自动化控制的技术来实现监控。对现代社会而言，在工厂设备长期运行过程中，开关柜中的母线接点、高压电缆接头等部位因老化或接触电阻过大而发热，使相邻的绝缘部件性能劣化，甚至击穿而造成事故。 本文设计的是基于MSP430系列单片机的无线温度监控报警系统，可对母牌温度进行测量、误差判断、温度设定与高温报警等，而且具有键盘输入控制和、与无线通讯显示的功能。本次设计运用的是智能的数字温度传感DSl8B20对温度数据进行准确的采集，然后让采集的数字温度信号送入MSP430单片机进行数字处理，从而实时显示温度值，最后再根据预先设定好的报警值来完成对应的智能控制。通过NRF24L01无线控制模块来进行短距离在线控制。研究表明，NRF24L01无线发射模块在数据采集和传输的过程中有低功耗，抗干扰能力强等优点。 本系统的设计由温度数据采集、无线发射与接收模块、蜂鸣器报警、和液晶显示模块组成。实现得功能：温度的实时显示与控制；可设定温度的报警值，当温度超过预先设定域值时发出报警信号；测量温度值可通过蜂鸣器播报。 关键词 MSP430单片机，NRF24L01， 温度监控，蜂鸣器报警  ABSTRACT With the development of society and the progress of science, the importance of temperature detection has become increasingly evident in every aspect. Technology and temperature detection and monitoring equipment has been widely used in every industry life among products on the market is endless. Temperature detection and display gradually adopts automatic control technology to achieve control. Modern society, whether medical or industrial, temperature detection and monitoring is particularly important. This design is based on the MSP430 MCU Wireless temperature monitoring alarm system that can measure the temperature of the mother brand, judgment errors, temperature setting and temperature alarm, etc., but also to control and keyboard input, display and wireless communication capabilities. The system uses intelligent digital temperature sensor DSl8b20 temperature data collection, and the signal acquisition directly into the MSP430 microcontroller for processing, real-time display of temperature values, and then based on pre-set parameter values ??corresponding to complete intelligent control. For short-distance wireless NRF24L01 online control by the control module. Studies have shown that, NRF24L01 wireless transmitter module has low power consumption, strong anti-jam