（毕业论文）远程温度监测系统设计.doc

远程温度监测系统设计 （陕西理工学院 物理与电信工程学院 电子信息工程1班，陕西 汉中 723003） Author: Shi Jiangjiang (Grade12,Class4,Major of Electronic Information Engineering, School of Physics and Telecommunication Engineering of Shaanxi University of Technology, Hanzhong 723003,shaanxi) Tutor: Jia Jianke Abstract: Proposed remote temperature monitoring system design based on NRF24L01 module wireless transmitter and receiver. The system AT89S51 microcontroller as the control unit, digital temperature sensor DS18B20 and wireless transceiver module NRF24L01 test site temperature data for remote wireless measurement, as well as sound and light alarm systems and LCD1602 LCD. In the design, there are two main and AT89S51 microcontroller as the core of the system, DS18B20 test temperature real-time acquisition, NRF24L01 provide data for wireless transmission and reception system, alarm system using 9102 transistor drive to achieve the alarm buzzer. The system includes the main, from two subsystem design, including the main system to complete the test site set temperature value, set value is displayed, the actual value display, alarm out of control and receiving data capabilities; complete subsystem temperature acquisition, temperature control and transmit data function.The design concludes that this system has many advantages, such as its uniqueness, simple, convenience, and such common using. It can be widely used in lots of industrial producing and controlling fields, applying this system can depart operators from execrable environment, realize producing automation, and improve corporation’s producing efficiency. Key words: AT89S51; Temperature senior; NRF24L01; Display; Warning 目录 1 绪论 1 1.1 选题的目的和意义 1 1.2 国内外研究现状 1 1.3 本设计主要研究内容 3 2 设计要求与方案论证 4 2.1 设计要求 4 2.2 系统基本方案选择和论证 4 2.2.1 单片机芯片选择方案与论证 4 2.2.2 温度采集模块选择方案与论证 4 2.2.3 无线收发模块的选择方案与论证 5 2.2.4 显示模块的选择方案与论证 5 2.2.5 报警模块的选择方案与论证 5 2.3 电路设计最终方案的确定 6 3 系统的硬件设计与实现 8 3.1 系统硬件概述 8 3.2 主要单元电路的设计 8 3.2.1 单片机主控制模块的设计 8 3.2.2 温度采集电路模块的设计 10 3.2.3 无线