冲压模具-基座片级进模设计及其制造工艺-论文.docVIP

摘 要 本次设计主要是基座片级进模设计，精度一般，形状较为复杂，生产批量是大批量。手工送料，材料为可伐合金。通过工艺性分析，次零件需要经过拉深，冲孔，切口，整形，翻边落料等工序完成，经计算决定采用级进模来完成加工，分别有侧刃定距，冲工艺孔，切口，空工位，拉深，对拉深的底面整形，冲孔，空工位，落料翻边这9个工序。 模架选择四角导柱式，导向精度高，前后左右都可以进料关键字：落料，拉深，级进模 ABSTRACT This thesis applied professional curriculum theory and the actual production of knowledge, to cultivating and improving students ability to work independently with doing a cold stamping mould design in practical training work, consolidated and expanded the course content of cold stamping mould design, grasps the methods and steps of cold stamping mould design, Maste