毕业设计(论文)－基于UDP协议的远程控制系统的设计与实现.docVIP

PAGE 第PAGE 24页 基于UDP协议的远程控制系统的设计与实现 摘 要：以往的远程控制软件都采用TCP连接，TCP要始终与服务端保持连接，所以占用资源较大，上线主机太多的话会出现很多问题。UDP则不需要持久保持连接，它是无连接协议，占用资源少，通信速度快。即使上线主机再多，也不会出现卡机掉线的情况。客户端和服务端之间采用UDP协议传送信息。客户端和服务端均有UDP通讯服务端和UDP通讯客户端，且UDP通讯服务端一直处于侦听状态，一旦收到消息立即处理，同时还可以根据需要，利用UDP通讯客户端方发送信息。远程控制软件通常由两部分组成: 一部分是客户端(控制端)程序Clien t, 另一部分是服务器端(受控端)程序Server。使用前需要在控制端运行客户端程序, 在受控端运行服务器程序。 然后由控制端向受控端发出信号, 建立一个特殊的远程服务, 再通过这个服务, 使用各种远程控制功能发送远程控制命令, 控制受控端电脑中的各种应用程序运行。 关键词：UDP 协议 C/S结构 远程控制 Design and Implementation Remote Control System based UDP Protocols Abstract：The remote control software, the tcp connections, tcp will always remain connected with the server resources, so much larger, the needle thread host too much will a lot of problems. dont need to maintain a lasting udp connections, it is no connection, the land resources and communications speed. even if the needle thread host more, and will not occur for lost. Client and server udp agreement between the transmission of information. the client and server are udp service or udp communications client and server udp communications remained listening, once received news immediately, and also based on needs, the use of udp send information. communications client. Remote control software usually consists of two parts: the part of the client side application (control) clien t, the other part of the controlled end server () application server. use to control the client program run, the controlled end server running programs. then the controlling end to end a signal controlled, and establish a special the remote services, through the service, the use of remote control functions of a remote control command and control of computer controlled end of the application. Keyword：UDP Protocols C/S structure Remote Control 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc291001484 第一章 引言 PAGEREF _Toc291001484 \h 3 HYPERLINK \l _Toc291001485 1.1 本课题的研究背景和意义 PAGEREF _Toc291001485 \h 3 HYPERLINK \l _Toc291001486 1.2 国内外研究现状 PAGEREF _Toc291001486 \h 3 HYPERLINK \