波状挡边倾角输送机-48度提升机构-说明书.docVIP

摘 要 随着科技的发展，波状挡边倾角输送机已在以下，需要达到较大的提升高度时，将会出现输送距离长、占地面积大、土建工程量大、工艺布置复杂等缺点，从而大量增加工程投资。波状挡边带式输送机吸收了传统带式输送机、斗式提升机、埋刮板输送机的共同优点，同时又克服了普通胶带输送机的缺点，它的输送倾角可在～范围内任意布置，有利于老厂房改造。该机的研制和推广应用，可节约大量土地资源、减少土建工程量、降低工程投资，对我国工业的发展具有重要意义。 关键词：波状挡边倾角输送机；大倾角；输送带；布置角度 Abstract With the development of technology, corrugated sidewall conveyor inclination has been widely used in the transportation industry together.This article discusses the existing conditions to complete the corrugated wall angle conveyor design, made corrugated wall angle conveyor design program.A brief introduction of the corrugated sidewall conveyor angle overview of development, corrugated sidewall conveyor dip composition, corrugated sidewall angle conveyor system common equipment, corrugated sidewall conveyor dip in the practical work of the frequently asked questions.So far, my angle on the corrugated sidewall conveyor use is still relatively small, common belt conveyor angle is generally less need to promote greater heights, there will be a long distance transportation, covering an area of large civil engineeringengineering large, complex process layout of the disadvantages to a significant increase in engineering investment.Corrugated wall absorbed the traditional conveyor belt, bucket elevator, buried scraper conveyor common advantages, while overcoming the shortcomings of common belt conveyor, and its transmission angle can be arbitrary in the range ~layout is conducive to transform the old factory building.Development and application of machine can save a lot of land resources and reduce civil works, to reduce the engineering investment, industrial development in China is important.Keywords corrugated sidewall conveyor inclination angle of inclined conveyor belt arrangement 目 录 摘 要 I Abstract II 目 录 III CONTENTS V 第1章 绪论 1 1.1 输送机的发展现状 1 1.2 输送机的发展趋势 2 1.3 波状挡边倾角输送机的应用范围 3 1.4 波状挡边倾角输送机的结构特点 3 第2章 方案对比 5 2.1 波状挡边输送带 5 2.2 波状挡边的选择 7 第3章 设计计算 9 3.1 原始数据 9 3.2 输送量计算 9 3.3 运行功率及张紧计算 13 3.3.1传动滚筒