基于PLC控制的温度巡回检测及报警毕设论文.docVIP

摘要 目前国内的万能材料试验机只能在常温下进行材料的力学性能实验，不能满足在不同温度条件下研究材料的力学性能，国外有类似产品，但其价格十分昂贵。因此本文的目的就是设计一个能够加热和保温的装置。通过对有关万能材料试验机现存问题的分析，确立以PLC为控制核心，与FX2N -2LC温控模块相结合，在常规PID控制基础上，进行硬件和软件设计，实现对万能材料试验机温度的控制。 关键词：加热保温、PID控制、PLC、FX2N -2LC温控模块 Abstract Currently the universal material testing machine can only testing the mechanical properties of materials under the room temperature . It can not meet the conditions of different temperature which to research mechanical properties of materials . There are similar products in abroad ,but the price is very expensive . So this article is aimed at designing a device to