- 2
- 0
- 约1.15万字
- 约 23页
- 2016-12-31 发布于辽宁
- 举报
毕设论文—数字温度警报器的设计 .doc
中文摘要
数字温度警报器是利用传感器检测温度。采用数码管显示当前温度。当温度低于下限温度或者高于上限温度时系统发出报警声,从而起到测量和报警的功能。本系统以AT89C52单片机作为主控系统,利用DS18B20数字温度传感器作为温度传感器件。通过四位共阳极数码管作为显示器件,通过单片机控制温度显示温度。并可以设置温度上下限,当温度不在设置的温度范围内,蜂鸣器发出报警声。分析了温度传感器的工作原理。系统硬件电路以及软件部分的设计。实际测试表明。该方案切实可行并已在许多通信领域得到广泛应用。
关键词: 单片机,温度警报,DS18B20,AT89C52
ABSTRACT
Is to use digital temperature alarm temperature sensor detection. Using digital tube display the current temperature. When the temperature is lower than the floor temperature or higher than ceiling temperature alarm system, to measure and alarm function. This system with AT89C52 single-chip c
原创力文档

文档评论(0)