综采工作面供电设计毕业设计论文.docVIP

摘 要 通过综采工作面选定的配套机械设备，正确选择配套的电气设备，以保证综采设备能够正常的投入运行。 综采工作面供电是否安全、可靠、技术和经济合理，将直接关系到人身、矿井和设备的安全及采区生产的正常进行。由于煤矿井下工作环境十分恶劣，因此在供电上除采取可靠地防止人身触电危险的措施外，还必须正确地选择电气设备的类型及参数，并采用合理的供电、控制和保护系统，加强对电气设备的维护和检修，以确保电气设备的安全运行和防止瓦斯、煤尘爆炸。 综采工作面供电设计中，根据工作面用电设备的技术参数，对移动变电站进行选择计算、高压低压电缆进行选择计算、高压低压开关进行选择、短路计算及继电保护装置进行整定。 关键词：综合机械化采煤；负荷统计计算；设备选型；移动变电站 ABSTRACT Mechanized mining face by supporting selected mechanical equipment, electrical equipment supporting the right choice to ensure the fully mechanized mining equipment to normal operational. Fully mechanized coal mining face power supply is safe, reliable, technical and economic rationality, will be directly related to the physical, mines and equipment, safety and production of normal mining area. As the coal mine working environment, is very bad, so in addition to the power supply on the risk of electric shock and reliable measures to prevent the physical, but also have the right to choose the type of electrical equipment and parameters, using reasonable power, control and protection of electrical equipment and to prevent gas and coal dust explosion. Working Face the design of power supply system, face of electrical equipment according to the technical parameters of the mobile substation to select terms, selection and calculation of high voltage low voltage cables, high pressure low pressure switch to choose short-circuit calculations and protective device setting. Keywords:Mechanized coal mining; Load statistical computing; Equipment Selection; Mobile Substation 目 录 1 综采工作面供电说明 1 1.1已知资料 1 1.2工作面设备选用及布置 1 1.2.1工作面机电配备表 1 1.2.2主要设备技术特征 1 1.3工作面设备布置 2 2 综采工作面供电系统负荷计算 4 2.1电压等级 4 2.2工作面供电系统负荷统计 4 2.2.1负荷统计见表 4 2.2.2供电系统的拟定原则 5 2.3移动变电站的选择 6 2.3.1移动变电站容量计算 6 2.3.2移动变电站容量选择 7 3 供电系统的拟定及高压电缆的选择 10 3.1供电系统的拟定 10 3.2高压电缆的选择 10 3.2.1高压电缆型号的选择 10 3.2.2高压电缆的主芯线截面的计算与校验 10 4 低压电缆截面的选择 14 4.1低压电缆的选择 14 4.1.1低压电缆型号的选择 14 4.1.2低压电缆长度的确定 16 4.1.3低压电缆的芯数的确定 16 4.1.4低压电