毕业设计论文---芦岭15mta选煤厂方案设计及主厂房工艺布置说明书 .docVIP

淮北矿业集团芦岭1.5Mt/a选煤厂方案设计及主厂房工艺布置 摘要 中国是一个煤炭生产大国，中国的煤炭企业越来越重视选煤行业的发展，以提高煤炭产品质量。因此，先进的设计有着重要作用。本设计是芦岭选煤厂的主厂房，这篇论文首先介绍芦岭矿厂区位置、地理概况和原料煤基地。本设计采用重介选煤工艺，其主要设备是无压给料三产品重介质旋流器。然后阐明了芦岭矿选煤厂的选煤方法的特点以及制定该工艺的依据。并且介绍了选煤厂的服务年限和车间的工作制度，编制计算和选型。最后，从数量检查、质量检查和采制化设施三个方面论述了该厂生产技术检查。设计符合设计要求，能够较好地完成设计任务。 关键词：三产品重介旋流器，选煤厂，工艺效果 THE DESIGN AND LAYOUT OF THE MAIN PLANT PROCESS OF THE 1.5Mt/a LULING COAL PREPARATION PLANT OF HUAIBEI MINING GROUP ABSTRACT China is a large coal production country .The coal enterprises in china pay attention to develop the coal preparation industry more and more in order to improve coal product quality. So, the advanced design plays an important role . The design is the Luling coal preparation plant, the first part of this thesis introduces the position of plant area and general geography situation and the base of raw coal of Luling Mine. The design adopt the heavy medium Preparation technique, and its main equipments are three-product dense medium cyclone by unpressurized feeding. Then introduces the coal preparation methods and the preparation technique and why preparation technique is adopted. Then introduces the limit Service time and the work system of coal preparation industry, compute the preparation technique and choose the type. In the last part, I discuss the arrangement of crafts and the quantity check and the facilities adopted, by which the technique of Luling coal preparation plant can be checked. The design fits the requirement, and can complete the design. KEYWORDS: three-product dense medium cyclone, coal preparation plant, process effect 目录 摘要 I ABSTRACT II 1 绪论 1 2 厂区概况 2 2.1厂区位置 2 2.2地理概况 2 2.3气象、地震 2 3 原料煤基地 3 3.1 厂区地质特征 3 3.2 煤层及生产矿井埋藏量、生产能力和服务年限 3 4 煤质特征及其可选性 4 4.1 煤质特征及其可选性 4 4.2煤质资料分析 4 4.2.1原煤筛分试验 4 4.2.2原煤浮沉试验 5 5 选煤方法限度及工艺流程说明 8 5.1 选煤方法与限度 8 5.2 工艺流程制定依据 8 5.2.1选择无压给料三产品重介旋流器的依据 8 5.2.2 采用直接浮选的依据 9 5.3 工艺流程的说明 10 5.3.1 分选、脱介、脱水作业 10 5.3.2 介质回收 10 5.3.3 粗煤泥回收 10 5.3.4 煤泥水处理 11 6原煤设计能力、工作制度及服务年限 13