redhat4安装Oracle10g的参数设置.docVIP

redhat4安装Oracle10g的参数设置 ****/etc/sysctl.conf ******** 10g kernel.shmall = 2097152 kernel.shmmax = 2147483648 kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 fs.file-max = 65536 net.ipv4.ip_local_port_range = 1024 65000 net.core.rmem_default = 262144 net.core.rmem_max = 262144 net.core.wmem_default = 262144 net.core.wmem_max = 262144 **********11g kernel.shmall = 2097152 kernel.shmmax = 2147483648 kernel.shmmni = 4096 kernel.sem = 250 32000 100 128 fs.file-max = 65536 net.ipv4.ip_local_port_range = 1024 65000 net.core.rmem_default = 4194304 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 262144 *********sysctl -p ****************修改 /etc/security/limits.conf 文件 vi /etc/security/limits.conf,最后面加入： # oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 ********************************* 1.以root用户登录系统，从OTN下载Oracle 10g，解压 /software/products/database/oracle10g/index.html -------------------------------------------------------------------------------- 2. 检查硬件需求 1）至少1G内存 内存大小 Swap分区大小 1G-2G RAM的1.5倍 2G-8G 与RAM相等 大于8G RAM的0.75倍 相关命令： #grep MemTotal /proc/meminfo #grep SwapTotal /proc/meminfo 如何增加swap分区? # mkdir /temp [root@pdc newfolder]# dd if=/dev/zero of=/temp/swap bs=1k count=1024000 1024000+0 records in 1024000+0 records out 1048576000 bytes (1.0 GB) copied, 10.2443 seconds, 102 MB/s # ll /temp/swap -rw-r--r-- 1 root root 1048576000 May 22 17:27 /temp/swap # mkswap /temp/swap Setting up swapspace version 1, size = 1048571 kB # swapon /temp/swap 2）/tmp至少有400M剩余空间 相关命令： #df -hk /tmp 3）按照安装类型的不同，Oracle最后大约占用1.5G-3.5G的硬盘空间 -------------------------------------------------------------------------------- 3.软件需求 1）操作系统：redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 如果你使用的不是上面列出的操作系统，安装时可以能会得到错误： Checking installer requirements... Checking operating system version: must be redhat-3, SuSE-9, redhat-4