本科毕业论文--年产200万吨1580热轧带钢生产线设计说明书.doc

河北联合大学轻工学院 QINGGONG COLLEGE, HEBEI UNITED UNIVERSITY 毕业设计说明书 设计题目：年产200万吨1580热轧带钢生产线工艺设计 摘 要 本设计任务为年产200万吨热带连轧车间，选择250mm厚坯，双粗轧可逆布置。产品范围1.5~18mm，典型产品5mm。产品要求品种广泛，质量优良。 设计内容包括建厂依据，原料选择，轧机数量、形式、能力选择，轧制规程计算，轧制图表，年产量计算，凸度规程计算，电机发热校核，轧辊强度校核，辅助设备校核，金属平衡、燃料消耗计算。 为了能生产高质量的汽车板用热卷，轧制时对中间坯的厚度、凸度、表面光洁度都有较高要求，对温度有更严格的制度。粗轧机配置CVC，控制凸度，严格控制中间坯凸度，也提高粗轧压下量。采取辊道边部加热、层流边部遮挡，保证热卷产品残余应力较小。采用新型板凸度仪，高效处理凸度信息，实现凸度、平直度自动控制，做到表面光洁，尺寸精度高，为后续冷轧提供合格带卷。 所设计热轧厂装备有高效的带钢轧制自学习模型和调节系统，从而使带钢厚度、板形、宽度、终轧和卷取温度的控制精度极高。能够使产品达到设计产量和品种质量的要求，满足市场需求。 关键字 1580热轧带钢；厚板坯；粗轧CVC轧机；汽车板用热卷Abstract Designed to complete the design of the task book requirements (more than 2.0 million tons annual output of varieties of tropical plant and rolling). Choice of 250mm thick billet, dual rough layout reversible binding. Product range 1.5 ~ 18mm. Typical Product 5mm. Wide varieties of product requirements, good quality. The basis of content, including plant design, rolling a point of order, the crown of order, the rolling charts, annual production, the crown of order, the electrical heating calibration, intensity calibration roll, check auxiliary equipment, metal balance, fuel consumption calculation. In order to produce high quality hot rolled plate with the car, rolling on the piece thickness, convexity, surface finish requirements are high, the temperature more stringent system. Take roll edge heating, laminar flow edge block, to ensure thermal residual stress in a small volume products. Instrument using the new crown, high crown of information processing to achieve crown, flatness control, so that smooth surface, size and high precision cold-rolled to provide qualified for the follow-up coil. New plant is equipped with hot-rolled strip steel rolling technology and highly efficient model and conditioning systems, so that the strip thickness, flatness, width, end-rolling coiling temperature control and high accuracy. Enable the production of products to meet the design requirements of the quality and va