2016设计评审表.docVIP

Mold no（编号） Material（材料） Shrinkage（收缩率） Designer（设计师） Date（确认日期） ID Area Items to check 核对内容 Yes No Remark 序号 范围 1 准备资料 Data Material preparation 是否有准备好相应的资料：产品图，DFM，任务单，样品，客户技术要求，并检查产品图，DFM，任务单等主要信息。Are the needed Data and materials prepared: product drawings, DFM, mold processing bill, sample and customer requests. Check the main information for product drawings, DFM and mold processing bill 2 DFM问题 DFM issue 镶件分型及浇口是否依照客户认可之DFM? Are the inserts and parting according to DFM of customer? 检查产品开模后是否能留在动模侧？模具的动作结构是否合理？Check whether the products can be kept in movable mold side and whether the movement of the mold is reasonable. 模穴号及表面要求是否已经明确要求？Have the cavity no. and surface finishing been clearly requested? DFM是否都合理，没有需要跟客户确认的东西。 Are the DFM details reasonable? Is there anything needed to confirm with customer? 3 成型镶件Inserts 产品缩水率是否已经乘上正确的数值？数值是: Check whether the product has been taken correct Shrinkage? The data is . 产品公差是否已经根据产品图调整到位，并考虑到调整公差的尺寸？Have the tolerance of product been adjusted according to product drawing and taken into consider the measurement of the tolerance size. 检查多穴模腔的排位是否合理，core及cavity的尺寸大小是否正确？Check whether the layout of multi-cavity is reasonable and whether the size of core and cavity is correct. 主镶件是否有设计精定位？Is there precision locating designed for main inserts? 分型面是斜面时是否有设计凸起的平衡止口？Is there any protrudent rabbet designed for the slant parting surface? 主镶件的螺丝尺寸、数量及固定方式是否合理，正确？镶件长度大于150mm是否有设计吊起工艺孔?Is the screw size, qty., and fixation type is correct for main inserts? 分型面设计是否合理，简单，顺滑，易于加工？Is the parting surface design reasonable, simple, smooth and easy to process? 模具设计有否有避免薄铁和细长强度太差的镶件？Does the mold design avoid thin steels and friable long inserts? 插穿和碰穿的角度是否足够？Is the angle for draft lock and shut off enough? 封胶面较大时和其它没必要的地方是否有做让位？Is there any space between the large sealing position and other unnecessary positions? 4 滑