5000td新型干法水泥厂生料粉磨车间工艺设计汇总.docVIP

唐 山 学 院 毕 业 设 计 设计题目：5000t/d新型干法水泥厂生料粉磨车间工艺设计 系 别： 环境和化学工程系 班 级：09无机非金属材料（1）班 姓　 　名： 指 导 教 师： 2013年6月12日 5000t/d新型干法水泥厂生料粉磨车间工艺设计 摘 要 本设计是5000t/d新型干法水泥厂全厂及生料粉磨车间工艺设计。根据任务书的地形图确定全厂的工艺布置，绘出全厂工艺布置图和生料粉磨车间工艺布置图。本设计中，全厂生产线采用一条龙排布，流程顺畅，更节省输送设备；全厂的工艺流程从原料进厂到水泥出厂均采用均化措施，更能保证出厂水泥的质量；粉磨是水泥生产过程中重要的工艺环节，合理选择粉磨流程和设备，对提高粉磨效率、节约能源、提高经济效益具有极其重要的意义。全厂的主要设备选型从生料磨到水泥磨均采用立磨，粉磨效率高、单位电耗低、磨内空间大、烘干能力强；本设计对生料粉磨系统进行优化设计，使其能够高效低耗的运行。并采用国内外先进的生产设备及生产工艺最大限度的降低能耗及投资，并保证水泥高产、高质，做到环保经济的设计理念。 关键词：生料粉磨 新型干法生产 水泥 5000 t/d NSP Cement Raw Meal grinding workshop process design Abstract This design is the 5000 t/d NSP cement factory and workshop of raw material grinding process design. According to the specification of topographic map to determine the process arrangement for the factory, paint factory process layout and raw meal grinding workshop process arrangement. In this design, factory production line adopts a dragon configuration, process smoother, more save transportation equipment; Process from raw materials into the factory for the factory to the cement factory adopt homogenizing measures, more can guarantee the quality of cement factory; Grinding is important in the process of cement production process, choose the grinding process and equipment, to improve the grinding efficiency, save energy, improve the economic benefit is of great significance. Main equipment selection for the factory from raw material to the cement grinding adopt vertical mill, high grinding efficiency, unit power consumption low, grinding inside space is large, drying ability is strong; This design to optimize design of system of raw material grinding, allow it to run efficient low consumption. And USES the domestic and foreign advanced production equipment and production process of utmost reduce energy consumption and investment, high yield, high quality, and ensure the cement to do the design concept of green econ