WAVE600软件使用手册.docVIP

WAVE6000软件使用手册 建立新程序 选择菜单[文件|新建文件]，如图1所示。 图1 在出现的源程序窗口中输入所需编写的程序，如图2所示。 图2 3、保存程序，选择菜单[文件|保存文件]，保存时文件名称必须带上后缀名“.ASM”，如图3所示。 图3 4、建立新项目，选择菜单[文件|新建项目]，如图4所示。 图4 5、在弹出的窗口中，加入模块文件，选择刚才保存的文件YEGANG.ASM，如图5所示。 图5 6、加入包含文件，若没有包含文件，则可按取消键，此处按取消键。如图6所示。 图6 7、保存项目。在保存项目对话框中输入项目名称，注意此处无须添加后缀名，软件会自动将后缀名设成“.PRJ”。按保存键将项目存在与你的源程序相同的文件夹下。如图7所示。 图7 8、仿真器设置，选择菜单[设置|仿真器设置]，在弹出的“仿真器设置”对话框中，按图8设置，选择“使用伟福软件模拟器”。 图8 9、双击项目中YEGANG.ASM文件，在所需设置断点的指令上右键设置断点，如图9所示。 图9 10、选择菜单[项目|编译]，进行编译程序，如图10所示，若无错，则进入下一步，若有错，则先修改程序，然后再进行编译程序。 图10 11、查看结果，选择菜单[窗口|数据窗口|DATA]，如图11、12所示。 图11 图12 注意：DATA——片内RAM区域 CODE——ROM区域 XDATA——片外RAM区域 PDATA——分页式数据存储器，51中无用 BIT——位寻址区域 saturation of the road network in the vast majority of sections below 0.8, higher levels of service, but a few very high saturation of the road, xufu, rongzhou road saturation is more than 1, level of service very poor. (2) major intersection service level crossing is an important part of the urban road network, whether it is open to the entire road network speed and efficiency plays a key role. Yibin city, but some intersections are not optimized saturation of the road network in the vast majority of sections below 0.8, higher levels of service, but a few very high saturation of the road, xufu, rongzhou road saturation is more than 1, level of service very poor. (2) major intersection service level crossing is an important part of the urban road network, whether it is open to the entire road network speed and efficiency plays a key role. Yibin city, but some intersections are not optimized saturation of the road network in the vast majority of sections below 0.8, higher levels of service, but a few very high saturation of the road, xufu, rongzhou road saturation is more than 1, level of service very poor. (2) major intersection service level crossing is an important part of the urban road network, whether it is open to the entire road network speed and efficiency pl