胶合隔热导轨接头(G-IRJS)和常规隔热导轨接头(O-IRJS)的供应标书.docVIP

目录 综述 规范和标准 语言和测量单位 优先顺序 卖方的技术文档 材料和工艺 检验 作业范围 不适应范围 买方供给范围 招标提交的文件 签约后提交的文件 投标人须知 设计寿命 交付数量 保质期 防锈保护 招标书 其他要求 附件——1：技术规格 附件——2：交付进度表和数量 附件——3：标书格式 附件——4：提交的文件 附件——5：预计装箱单 附件——6：三菱运输质量担保说明书（CP-9-077S） 附件——8卖方要求管理说明 综述 范围 本规范包括涉及以下项目的胶合隔热导轨接头端柱工程概算表轴负载 near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color near wire normal to. 6.2.2 cable cutting when cutting should be around cable and profile cutting with a cutting knife cutting a week, cutting depth for cable outer (insulation) stripped, cannot hurt the inner insulation layer and core. 6.2.3 before the first cable production, should be based on the amount of cable specifications, models to select the appropriate specifications of heat shrink tube, heat-shrinkable sleeve color