多变流水灯控制电路的设计毕业论文技术报告.doc

Anhui Vocactional Technical College of Industry Trade 毕业论文 多变流水灯控制电路的设计 The design of the variable water lamp control circuit 所在系院： 电气与电子工程系 专业班级： 电子信息（一）班 学生学号： 2014240116 学生姓名： 杨 磊 指导教师： 丁 莉 2017年 5 月 20 日 Anhui Vocational Technical College of Industry Trade 毕业设计说明书 多变流水灯控制电路的设计 The design of the variable water lamp control circuit 所在系院： 电气与电子工程系 专业班级： 电子信息（一）班 学生学号： 2014240116 学生姓名： 杨 磊 指导教师： 丁 莉 2017年 5 月 20 日 多变流水灯控制电路的设计 摘要本设计是一LED流水灯的设计。 整机以美国ATMEL 公司生产的40脚单片机AT89C51为核心，介绍了以它为控制系统的LED灯的动态设计和开发过程。通过该芯片控制一个行LED灯按一定顺序亮，文中详细介绍了LED显示的设计思路。 单片机控制系统程序采用单片机汇编语言进行编辑，通过编程控制各显示点对应LED阳极和阴极端的电平，就可以有效的控制各显示点的亮灭。LED显示以其组构方式灵活、技术成熟、成本低廉等特点在证券、运动场馆及各种室内/外显示场合得到广泛的应用。The design of the variable water lamp control circuit This design is LED flows the lantern floated down river the design. 　 Complete machine 40 foot monolithic integrated circuit AT89C51 which produces by American ATMEL Corporation is a core, introduced take it as the control system LED lamp dynamic design and the performance history. Controls a line of LED lamp through this chip to be bright according to certain order, in the article in detail introduced the LED demonstrationdesignmentality. The monolithic integrated circuit control system procedure uses the monolithic integrated circuit assembly language to carry on the edition, controls each demonstration point correspondence LED anode and the cloudy extreme level through the programming, may effective control each demonstration extinguish brightly. Certainly flows the lantern floated down river only is generally when uses the chip makes the control the beautification function, if only uses the monolithic integrated circuit to do flows the lantern floated down river, cannot very good manifest the monolithic integrated circuit