木炭机设备配套制棒机使用说明书范文.doc

制棒机使用说明书 Makes the stick machine instruction for use 一、用途及特点：First, use and characteristic: 本机是利用木屑、稻壳、花生壳等木质物料（不添加任何粘结剂），在高压条件下，制成棒状固估燃料的主要设备。 This aircraft is using lignin materials and so on sawdust, rice husk, peanut shell (does not increase any cementing agent), under the high-pressured condition, makes clavate estimates the fuel firmly the major installation. 本机采用温度调节指示器，可在设定温度下稳定操作，并具有结构合理，操作维修简单等优点。由本机生产的固体燃料着火容易、热值高（与一般木材相比提高20%以上），燃烧时污物少，比重大于贮存和运输。能够充分利用农林剩余物，减轻我国农林能源紧张的予盾。This aircraft uses the temperature control display, may in establish under the temperature the stable operation, and has the structure to be reasonable, operation service simple and so on merits. The solid fuel which produces by this aircraft catches fire, the calorific value high (to compare easily with general lumber enhances above 20%), when combustion the contamination are few, the proportion is bigger than storing and the transportation. Can use the farming and forestry surplus fully, reduces our country farming and forestry energy anxiously to give the shield. 二、工作原理：Second, principle of work 利用木质原料固有特性，通过螺旋挤压，在高温、高压下，木质原料中的木素塑化使微细纤维相结合，形成棒状固体燃料。 Using the lignin raw material intrinsic property, through the screw extrusion, under the high temperature, the high pressure, in the lignin raw materials lignin plasticizing causes the tiny textile fiber to unify, forms the clavate solid fuel. 图一 工作原理框图 三、主要技术参数及性能：Third, major technique parameter and performance: 1、装机功率：15KW 380V 50hz 1st, installed power: 15KW 380V 50hz 电机功率：11KW Electrical machinery power: 11KW 热功率：4.5KW Thermal power: 4.5KW 2、生产能力：80kg-120kg/350kg-400kg 2nd, productivity: 80kg-120kg/350kg-400kg 3、产品耗电量：100kwh/t 3rd, product power consumption: 4、整机外形尺寸：长X宽X高=1670X684X1250 4th, complete machine external dimensions: Long X width X high =1670X684X1250 5、整机重量：580kg Φ50 900kg Φ80 5th, complete machine weight: 580kg φ50 900kg φ80 6、原料要求： 6th, raw material request: （1）含水率：8-12%（湿基） 1