渦流探伤仪操作规程.docVIP

DEFECTOMAT CI 2.812 操作规程 硬件 Defectomat CI 2.812用于在线检测接触线拉丝机生产的接触线产品, it doesn’t include ferromat that is the reason why it is important to have 2 channels DF to analysis the surface and the inside contact wire Equipment CI 2.812 with 2 channels DF Connection cable from the equipment CI 2.812 to the coil (the distance of the cable should be not bigger than 50 m, and it is important to avoid avoid sharp bends in the cable route) Coil (even work with 2 channels DF one coil is enough) ; it is necessary 3 shapes of coil: one on service ,1 spare part and the last one in case of damage.