原创力文档- 1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
- 2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
- 4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
- 5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传，每下载1次， 网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
be stred in indoor temperature for 5 to 40 degrees Celsius
be stored in indoor temperature for 5 to 40 degrees Celsius, and should avoid the sunlight and heat radiation.
6. The non-metallic pipe connections, before compiling connection operation process file should consult manufacturers. Due to the performance of different manufacturer production of pipe and pipe fittings, there may be differences in connection operation process file before coping manufacturers. Due to the construction environment has a great influence on the quality of non-metallic pipe connection, therefore should avoid as far as possible in the temperature too high or too low, wind and other harsh environment construction, and avoid direct sunlight strongly.
Fused, for example, the connection and hot melt connection, the connection machine working environment temperature should be between 10 and 40 degrees Celsius, winding connection, the ambient temperature should not be less than 5 degrees Celsius, seal socket connection shall not be used when the frozen hard rubber ring.
7. The valve installation should comply with the rules
(1) before installation of valve, should be in accordance with the design documents to check the model, and should be installed according to the medium flow to determine its direction; Check valve packing, the gland bolts adjustment allowance shall be maintained.
(2) when the valve with the metal pipe with flange or thread connection, the valve should be installed in a closed; In welding connection, the valve shall not be shut down, weld the underlying appropriate USES argon arc welding. When the non-metallic pipe connected by fused or hot melt connection, the joint near the valve is in open position.
(3) the relief valve installation shall meet the vertical installation, the valve outlet piping to the safe place, they can set on the in and out of the pipe should add seal globe valve, and shall, in accordance with the provisions of the locking in the fully open position.
8, hanger installation should comply with the rules
文档评论（0）