基于单片机的火灾自动报警系统的设计(论文).docVIP

- PAGE 41 - 摘 要 宾馆火灾自动报警系统是随时警惕火灾、及时报警和输出联动灭火信号的忠实哨兵。该系统的设计主要涵盖以下六个方面：传感器的选型、单片机的选取、接口芯片的选取、报警装置的设计、电源的设计以及联动消防装置的设计。 火灾自动报警系统通过一定的方式向火灾报警控制器发出火灾报警信号，火灾报警控制器收到报警信号后，立即发出声光报警，并打开消防联动装置。本设计的检测装置由离子感烟传感器UD-02和与之配套的专用集成电路DQ-295等组成，通过对现场的火灾参数采集，模/数转换，地址编码，然后传送给单片机，由单片机进行相应的运算处理，判断现场是否发生火灾。这种信号处理方式将单片机用于火灾模式判别，可以根据火灾发生时，火灾参数的发展变化规律来识别真假火灾，不同于传统单一的定值判别方式，有利于提高火灾判别的准确性。 关键词：火灾自动报警系统； 监测； 控制； 消防联动 ABSTRACT Fire Auto-alarm system of hotel is used to monitor the fire in the room continuously ,then report the corresponding information to the public as well as control the fire preventional device.It contains six aspected contents mainly,that are sensors,a single Chip MircroComputer, the I/O integrated Connection chip,the Auto-alarm device,the design of the Power source and the linkaged fire preventional device. Fire Auto-alarm system of hotel sends out the correlated signal to the single Chip MircroComputer in some way,then the single Chip MircroComputer will drive the Acousto-optics alarm device and the linkaged fire preventional device after receive the signal.In this Paper,the mointor deveice is made of Ion feeling smoke sensor with the model of UD-02 and its corresponding integrated connection chip with the model of DQ-295.It will gather all the fire Parameter ,then Process the data in A/D converter in order to judge whether there may be a fire or not,the core unit of this Processing way of signal is a single Chip MircroComputer,it has the ability to identificate the true or false fire according to the processed date.It is very advantage to inhance the accurate degree of the fire. Keywords: Fire Auto-alarm system； monitor； control ； linkaged fire preventional device 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc201310544 1 绪论 PAGEREF _Toc201310544 \h 1 HYPERLINK \l _Toc201310545 1.1 本论文的研究背景 PAGEREF _Toc201310545 \h 1 HYPERLINK \l _Toc201310546 1.2 现有火灾自动报警系统比较 PAGEREF _Toc201310546 \h 2 HYPERLINK \l _Toc201310547 1.2.1 传统火灾探测技术 PAGEREF _Toc201310547 \h 2 HYPERLIN