完整DS18B20温度测控教案.doc

#includereg52.h sbit s2=P0^0; sbit led=P1^3; unsigned char wendushangxian=0; sbit DQ=P1^6; sbit wei1=P3^0; sbit wei2=P3^1; sbit wei3=P3^2; sbit wei4=P3^3; sbit key_Max_jia=P0^0; sbit key_Max_jian=P0^1; sbit key_Min_jia=P0^2; sbit key_Min_jian=P0^3; sbit dianji_jian=P1^2; sbit dianji_jia=P1^7; sbit Led_tempreture_Max=P1^3; sbit Led_tempreture_Min=P1^4; sbit Led_normal=P1^5; unsigned char num[11]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xbf}; int tempreture_Max=40; int tempreture_Min=-10; void delay_mylself(int temp) { unsigned int i,j; for(i=0;itemp;i++) for(j=0;j1140;j++) ; }