3GPP_36.213_part1.pptVIP

Downlink Power Allocation Downlink power control determines the energy per resource element (EPRE). The term resource element energy denotes the energy prior to CP insertion. The term resource element energy also denotes the average energy taken over all constellation points for the modulation scheme applied. Downlink Power Downlink Power Control Downlink Power Downlink Power Control Downlink Power Allocation l Base is Cell-RS EPRE: – The downlink cell-specific reference-signal EPRE can be derived from the downlink reference-signal transmit power given by the parameter referenceSignalPower provided by higher layers – referenceSignalPower: linear average over the power contributions (in [W]) of all RE that carry cell-specific RS within the operating system BW – Const over DL operating BW and all subframes, until new received referenceSignalPower received Random Access Procedure From the physical layer perspective, the L1 random access procedure encompasses the transmission of random access preamble and random access response. The remaining messages are scheduled for transmission by the higher layer on the shared data channel and are not considered part of the L1 random access procedure. A random access channel occupies 6 resource blocks in a subframe or set of consecutive subframes reserved for random access preamble transmissions. The following steps are required for the L1 random access procedure: Layer 1 procedure is triggered upon request of a preamble transmission by higher layers. A preamble index, a target preamble received power (PREAMBLE_RECEIVED_TARGET_POWER), a corresponding RA-RNTI and a PRACH resource are indicated by higher layers as part of the request. Determine a preamble transmission power PPRACH A preamble sequence is selected from the preamble sequence set using the preamble index. A single preamble is transmitted using the selected preamble sequence with transmission power PPRACH on the indicated PRACH resourc