（毕业论文）缸头机械加工工艺规程及镗Φ68孔、铣右侧面夹具设计.docxVIP

摘要 本次毕业设计主要是对缸头的各项参数以及安装位置等进行考量，设计零件的机械加工工艺规程。在保证所需加工的缸头上的面和孔的精度以及与其他面的位置的准确度，进行缸头所需加工的夹具设计，最终完成本次设计。本次毕业设计了缸头I的初步机械加工工艺规程及镗（车）Φ68孔、铣右侧面的夹具。本设计宗旨是实用，正确，简单。关键词 ： 缸头，工艺规程，车削φ68孔，铣削右侧面ABSTRACT The graduation project is mainly to the parameters of the Support I and the installation location, etc. to consider the design of parts of the mechanical processing procedures. In order to ensure the accuracy of the surface and hole and the accuracy of the I on the surface and the position of the required machining, carry out the fixture design of the bracket I, and finally finish the design. The graduat