《HL6000C型联合收割机割台驱动系统的改进-说明书》.docVIP

目 录 0引言 …………………………………………………………………………………1 1 联合收割机总体结构……………………………………………………………… 3 1.1联合收割机的总体设计原则…………………………………………………… 3 1.2 HL6000C型联合收割机机构简介……………………………………………… 3 1.3HL6000C型联合收割机割台驱动系统的分析……………………………………6 2 联合收割机割台驱动系统主要零部件的计算分析………………………………8 2.1驱动轴的强度校核……………………………………………………………… 8 2.2驱动轴加工工艺的编制………………………………………………………… 11 2.3驱动轴键槽加工的夹具设计…………………………………………………… 12 2.4驱动轴的改进…………………………………………………………………… 16 2.5部分零件的三维造型…………………………………………………………… 24 2.6预期结果………………………………………………………………………… 24 3结论………………………………………………………………………………… 25 致谢…………………………………………………………………………………… 26 参考文献……………………………………………………………………………… 27 附件清单……………………………………………………………………………… 28 摘要 HL6000C型收割机是一种稻麦双收履带式半喂入型联合收割机，它具有马力大、效率高、可适应高湿度稻田收割等优点，但由于其结构复杂，在实际应用过程中还存在不少问题和弊端，本文通过对其割台部分驱动系统的分析和计算，找出其存在的问题并提出对其中部分问题的解决方案，以提高其割台部分的质量，从而进一步提高收割机的总体质量。同时在整个计算分析过程中，还运用了AUTOCAD对其进行结构的改进和优化，并通过AUTOCAD及Pro/E对其中部分零件进行三维造型，从而更直观地表现了其部分零件的结构特点。 关键词：收割机 割台 驱动系统 AUTOCAD Pro/E Abstract Model HL6000C harvester one rice wheat pairs of person who charges track half feed the entering type combined harvester, It have horsepowers of heavy, efficiency high, adaptable high humidity paddy field person who gather in merit, But because structure its complicated, exist many questions and drawbacks but also in the course of using actually, Through cut this text to it sets of part urge systematic analysis and calculate, find out existing problem its and put forward to among them some solution of problem, In order to improve it cut sets of quality of part, improve overall quality of harvester further. Among whole computational analysis course, use AUTOCAD carry on improvement and optimization of the structure to him at the same time, Carry on three-dimensional modelling through AUTOCAD and Pro/E to among them some part , display the structure characteristic of part ocular. Keyword: Harvester Cut platform Urge system AUTOCAD Pro/E 0 引言 目前我国收割机按其行走方式有自走式和背负式，按底盘结构分有履带式和轮式，按其喂入方式分有全喂入式、半喂入式和梳脱式，近几年国