《两工位钻孔_攻丝组合机床液压控制系统的设计》.docVIP

学号： 毕业设计说明书 设计题目：两工位钻孔、攻丝组合机床 液压控制系统的设计 系 部 机械电子系 专 业 机电一体化 班 级 机电102班 姓 名 指导教师 2012年10月17日 摘 要 本课题主要研究的是用PLC控制的两工位钻孔攻丝组合机床的运作。 两工位钻孔攻丝组合机床经系统通电后能自动完成工件的钻孔和攻丝加工，此机床主要由床身、移动工作台、夹具、钻孔滑台、钻孔动力头、攻丝滑台、攻丝动力头、滑台移动控制凸轮和液压系统组成。工作台的移动包括左移、右移及夹具的动作包括加紧和放松，钻孔滑台的移动包括前移和后移，均由液压系统执行，其中钻孔滑台和攻丝滑台的移动是通过控制凸轮来控制滑台移动液压系统的液压阀实现的，电气系统不参与。只需启动控制凸轮点击即可，但要注意凸轮转动的周期。该系统由PLC的控制，工作台和滑台的移动将严格的按规定的时序同步进行，使两种运动密切配合，提高实际生产的工作效率。 关键词 组合机床 PLC控制 程序编程 调试 Abstract The main research of this paper is to use PLC to control the two position drilling combined machine tool operation. Two position drilling combined machine tool the system power can automatically complete the drilling and tapping machine, which is mainly composed of a bed body, movable bench, fixture, drilling, drilling, tapping power head slider slider, tapping power head, slider mobile control cams and hydraulic system. Work bench mobile includes shift left, right and jig moves include a stepped up and relax, drilling the movement of the sliding platform includes forward and backward, implementation by the hydraulic system, wherein the drilling platform and tapping the movement of the sliding platform is controlled by a cam to control a slider mobile hydraulic system hydraulic valve, electrical system does not participate in. Just start the control cam click, but attention should be paid to the cam rotation cycle. The system consists of a PLC control, work station and the movement of the sliding platform will be strictly in accordance with the provisions of the timing synchronization, the two movement closely, improve production efficiency. Key words combination machine tool control procedures PLC programming debuggin