《数码相机面壳注塑模的设计与数控加工论文》.docVIP

PAGE PAGE 26 2009届本科毕业论文（设计） 论文题目：数码相机面壳注塑模的设计与 数控加工 学生姓名： 所在院系： 机电学院 所学专业： 机电技术教育 导师姓名： 完成时间： 摘 要 Pro/ENGINEER及MasterCAM是当前国内外模具设计与数控加工领域中使用最为广泛的CAD/CAM软件。二者的功能各有优缺点,联合应用可提高模具设计及其数控加工的质量和效率。本论文阐述了用Pro/ENGINEER软件进行数码相机面壳的模具设计,然后将图形数据转换到MasterCAM软件中进行数控编程的具体实现方法,并利用MasterCAM软件生成数控加工代码并输送到加工中心或数控铣床进行加工的方法和主要工艺。通过此次注塑模的设计，掌握了相关模具设计的主要步骤，对于CAD/CAM软件应用方面有了进一步的提高。 关键词：注塑模，模具设计，刀具路径，数控加工，凸、凹模 The design and numerical control machine processing of the digital camera cover-panel jet mould Abstract Pro/ENGINEER and MasterCAM are widely used in domestic and international moulds design and NC machining in the CAD/CAM realm . The combined application of these two softwares can improve molds design and its NC machinings quality and efficiency. This paper expatiates the method and main techniques to proceed the molds design of the Digital camera cover-panel with the Pro/ENGINEER software, then convert the graphics data to MasterCAM software to proceed the NC programme, and apply the MasterCAM software to create the NC machining code and transport it to the control system of the NC machining center or the NC milling machine for processing.Through design the jet mould, I has grasped the main step of the correlation mold designs, and also has the further enhancement on the CAD/CAM software application. Keywords：Jet mould, Moulds design, Tool path, NC machining, Punch –die  目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc256000000 Abstract羯际划秒猿捐稀旰坩钕粑钲燔 PAGEREF _Toc256000000 \h 2 HYPERLINK \l _Toc256000001 硝喝稻锎鹏芭盛拧毓辜飞篷禺 PAGEREF _Toc256000001 \h 4 HYPERLINK \l _Toc256000002 维剁蜩雇撮辈匿囫汽休滥陔搂 PAGEREF _Toc256000002 \h 4 HYPERLINK \l _Toc256000003 1 绪论嘘觎箩鹄杉淑女编鲸痛叠协诽 PAGEREF _Toc256000003 \h 4 HYPERLINK \l _Toc256000004 2 设计要求谩痉荛鬼枵灼硪爪坎薏蚣醵橇 PAGEREF _Toc256000004 \h 4 HYPERLINK \l _Toc256000005 3 用Pro/ENGINEER软件对数码相机面壳进行三维造型公犀炻览积铜雌嫦沌威薰拿狮 PAGEREF _Toc256000005 \h 5 HYPERLINK \l _Toc256000006 3.1 数码相机面壳的工艺性分析唰鳗辞活胚雎吨墀姻袄粟绞挺 PAGEREF _Toc256000006 \h 5 HYPERLINK \l _Toc256000007 3.