15085衬塑钢管(英文版).docVIP

S.Y.Technology,Engineering Construction Co.,Ltd.(CEEDI) Technical Specification Chapter No：15085 Title：Lining Plastic Composite Steel Pipe for Water Supply Edition No：A Contractor： Project Name：Prepared by Reviewed Approved Approved byFeb, 2010Chapter 1: General Description Content：lastic composite steel pipe for water supply are regulated in this section. Reference laws and regulations Lining plastic composite steel pipe for water supply CJ/T 136 The international laws and regulations shall be accepted by the owner prior to be used by contractor. Related Spec This section should be used with the following regulations and other contract documents at the same time to determine the overall requirements of lining plastic steel pipe system. 15060- Pipeline and pipe fittings-general description Warning: part of the basic requirements will be omitted if the above mentioned content is not adopted during the execution of this section. The clause in this section is preferred if any conflict happened for the content of lining plastic steel pipe system between this section and others. Review and Delivery Equipment supplier should provide the materials for owner’s review listed as the follows: The materials shall be shall be provided such as quality certificate and test report from the authorities, etc. The materials shall be provided such as full set of use and maintenance manuals, test record prior to delivery, external dimension drawing of the product, transportation dimension drawing, product disassembling list, packing list, list of nameplate(marks) picture and accessories(spare parts), etc. The materials should be packed properly to prevent being moistened prior to delivery. Provide the test record prior to delivery: all the test results specified in the standard articles should be recorded in detail prior to delivery. The product should have quality certificate as well as the obvious marks about size and label. The package surface should have the name of man