《无链电牵引采煤机牵引部设计(全套图纸)》.docVIP

摘 要 电牵引采煤机具有机电一体化程度高,装机功率愈来愈大,牵引速度成倍提高,而且牵引部调速系统具有节能、传动效率高等优点。 本次设计的采煤机正为适合中厚煤层使用的无链电牵引采煤机，主要设计内容为电牵引采煤机的牵引部结构设计，牵引速度为0~7m/s，电动机采用横向布置，通过二级直齿与二级行星减速器完成变速。大体内容：首先是不同方案的对比分析与确定，其次是各部结构尺寸的设计计算，最后对齿轮及相应的传动轴进行了强度校核，设计计算结果满足设计要求。 关键词：采煤机；电牵引；牵引部；Abstract Electric traction shearer.two machine has a high degree of mechatronics, increasing the installed power, speed, and doubled traction control system of energy saving, high transmission efficiency. The design of the coal mining machine is suitable for use in thick coal seam no chain electric haulage shearer main content, design for electric haulage shearer traction of structure design, drawing speed for 0 ~ 7m/s, motor adopts horizontal layout, through the second straight tooth planetary reducer with 2 completed. Content: the first is in different scheme comparison analysis and determination, followed by each structure size of design calculation, and finally to gear and the intensity of the transmission design and calculation results and meet the design requirements. Keywords： coal winning machine, Electric traction, Traction,目 录 摘要 I Abstract II 第1章 绪论 1 1.1 采煤机简介 1 1.2 国内外采煤机发展及使用状况 2 1.3 3 1.4 设计意义 3第2章 机械系统传动总设计 5 2.1 采煤机设计参数 2.2 采煤机牵引部总体方案确定 2.3 牵引部电动机的选用 2.4 牵引部传动比分配 第3章 牵引部系统各轴组件设计 11 3.1 齿轮设计 3.1.1 高速级直齿圆柱齿轮的设计计算 3.1.2 低速级直齿圆柱齿轮的设计计算 2 3.1.3 一级行星齿轮的初步设计及强度校核 3.1.4 二级行星齿轮的初步设计及强度校核 3.2 轴的设计计算及轴承的选择 3.2.1 Ⅱ轴的设计计算 3.2.2 一级行星轮轴初步设计及强度校核及轴承寿命计算 3.2.3 二级行星轮轴初步设计及强度校核及轴承寿命计算 结论 62 致谢 63 参考文献 64 CONTENTS Abstract．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．I Chapter 1 Introduction．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．1 1.1Introduction Shearer．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．1 1.2The development and use status at home and abroad Shearer．．．．．．．．．．．．．．．．．2 1.3 Overview of Shearer．．．．．．．．．．．．．．．．．3 1.4 The design purpose and meaning2 General Design of the mechanical system drive．．．．．．．．．．．．．．．．．．．．．．2.1 Shearer parameters．．．．．．．．．．．．．