- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
摘 要
本文利用真空电磁感应定向凝固装置分别研究了体积凝固状态下和定向凝固条件下FeCoNiCrAl高熵合金的组织特征和力学性能。研究结果表明: 体积凝固条件下FeCoNiCrAl高熵合金具有简单的BCC结构,FeCoNiCrAl高熵合金铸态组织为典型的树枝晶。 FeCoNiCrAl高熵合金在定向凝固过程中,随着抽拉速度的增大,凝固界面发生平-胞-枝转变,并且胞晶数目增多,胞晶间距减小,利用平界面凝固的稳定性判据进行了平胞界面转变的理论分析。
对体积凝固和定向凝固试样分别进行了显微硬度测试。结果表明,体积凝固条件下枝晶间的显微硬度比一次枝晶干的硬度大,是因为铬原子容易在枝晶间发生偏析,而且铬原子的体积相对其他原子较大,造成晶格的畸变较大的缘故。定向凝固区域的硬度小于淬火区的硬度,是由于定向凝固缓慢的凝固过程造成了晶格畸变的减少,降低了硬度。
关键词:FeCoNiCrAl合金;定向凝固;界面形态;显微硬度
Abstract
In this paper, Microstructure and mechanical properties of FeCoNiCrAl high-entropy alloy were investigated under the bulk solidification and directional solidification respectively. The results show that the as-cast microstructure of FeCoNiCrAl high-entropy alloy have simple BCC structure. Typical dendritic structures are observed in the alloy. During the directional solidification, the planar-cellular-dendritic transition of solidification interface can be found with increasing growth velocity. Meanwhile, the number of cellular increases but cellular spacing decreases. Stability criterion of plannar to celluar interface is employed to analyse the interface morphology of directionaly solidified FeCoNiCrAl high-entropy alloy.
Experimental investigation was carried out on the microhardness of FeCoNiCrAl alloy under the both bulk solidification and directional solidification condition. The interdendritic microhardness is larger than the one in the first dendritic, because Cr atoms are rich in the interdentrictic segregation, and atom radius of Cr is larger than that of other elements, distortion of crystal lattice is more severe, and microhardness in the directional solidification zone is smaller than the one in the as-quenched due to little distortion of crystal lattice during directional solidification.
Keywords: FeCoNiCrAl alloy;directional solidification; interface morphology; microhardness
目录
摘要 I
Abstract II
第1章 绪论 1
1.1 课题背景 1
1.2 定向凝固技术发展与研究现状 2
1.2.1 定向凝固技术的发展与应用 2
1.2.2 定向凝固理论研究现状 7
1.3 多主元高熵合金研究现状及发展前景 9
1.3.1 多主元高熵合金研究现
您可能关注的文档
- 《毕业设计(论文)- 国内轿车售后服务体系研究》.doc
- 《毕业设计(论文)- 交流异步电机试验自动采集与控制系统的设计》.doc
- 《毕业设计(论文)- 化妆品喷嘴注射模设计》.doc
- 《毕业设计(论文)- 变速叉——第一速及倒车》.doc
- 《毕业设计(论文)- 可视化网络监控管理系统》.doc
- 《毕业设计(论文)- 基于AT89c51单片机的交通灯控制系统设计》.doc
- 《毕业设计(论文)- 基于ARM的超声波测距模块开发》.doc
- 《毕业设计(论文)- 基于AVR智能车控制系统设计》.doc
- 《毕业设计(论文)- 基于MATLAB图像分割算法研究与实现》.doc
- 《毕业设计(论文)- 基于VHDL语言的HDB3码编解码器设计》.doc
- 《毕业设计(论文)-G30钢管自动切断液压系统设计》.doc
- 《毕业设计(论文)-G10钢管自动切断机床液压系统设计》.doc
- 《毕业设计(论文)-FX280梳麻机梳葙墙板加工工艺及工装设计》.doc
- 《毕业设计(论文)-FSAE进气系统设计与分析》.doc
- 《毕业设计(论文)-FTTB+LAN工程设计(》.doc
- 《毕业设计(论文)-GB集团文具车间现场管理分析与改进》.doc
- 《毕业设计(论文)-FSAE赛车排气系统设计与分析》.doc
- 《毕业设计(论文)-GE-Fanuc PMC轴控制功能在降低生产节拍上的应用》.doc
- 《毕业设计(论文)-GCPS—20复合式多功能型钻机设计》.doc
- 《毕业设计(论文)-GENESIS 2000内前制作流程》.doc
最近下载
- 制药工程制图习题集(第二版)于颖_课后习题答案解析.pdf
- 《建设工程施工管理》PPT课件.pptx VIP
- 义务教育版(2024)五年级全一册信息科技 第6课 判断选择用分支 教案.docx VIP
- 个人简历表格下载word(最新).pdf VIP
- Flexsim中文使用手册.pdf VIP
- 学习解读《水利水电建设工程验收规程》SLT223-2025课件.pptx
- 第八节可燃粉尘的爆炸.ppt VIP
- 视琦多媒体视觉训练系统使用说明书.doc VIP
- GB T 28749-2012_企业能量平衡网络图绘制方法_高清版_可检索.pdf
- 重庆秀山县公安局招聘警务辅助人员笔试真题2023(含答案).pdf VIP
文档评论(0)