《毕业设计(论文)-基于AT89C51单片机数控直流稳压电源设计》.doc

摘 要 本文主要论述了一种基于AT89C51单片机为核心控制器的数控直流稳压电源，由电源、显示电路、控制电路、数模转换电路、电路部分组成电源提供各个芯片、数码管放大器所需电压显示电路用于显示电源输出电压的大小输出电压值可通过按键对其进行步进控制（±0.1V），并且在按键长时间按下的时候能连续增加或减小。与传统的稳压电源相比具有操作方便，电源稳定性高以及其输出电压大小采用数码显示的特点数控稳压电源 Design of Digital Power source Abstract The method of this paper based on the AT89C51 microcontroller core of the numerical controller DC power supply design theory and realization. The digital DC power supply from the analog power, display circuit, control circuit, digital-to-analog conversion circuit, regulator circuit and analog-to-digital converter circuit composed of six parts. This system is based on the principle of single-chip microcomputer to control the unit AT89C51 to DAC0832 digital-to-analog converter chip reference voltage to control the output voltage, while the analog-to-digital converter ADC0832 chip convert the sampling of voltage to digital signals. Analog power supply to provide the various chips, digital amplifier control and the required operating voltage, display circuit for displaying the size of power supply output voltage, output voltage value may be stepping through the control button (± 0.1V), and a long button press when under the continuous increase or decrease. And compared to the traditional regulated power supply with easy to operate, high power stability, as well as the size of the output voltage characteristics of the use of digital display. This system has the resistance to interference well, the reliability is high, and finally output voltage value and real demonstration value precision higher merit. Key words: Digital DC Voltage-stabilized Power Source AT89C51 DAC0832 TLC1543目 录 摘 要 I Abstract II 绪论 1 1 直流稳压电源 3 1.1 直流稳压源概述 4 1.1.1 直流稳压源的定义 4 1.2 方案的比较与选择 4 1.2.1 传统直流稳压源 4 1.2.2 数控直流稳压电源 5 1.2.3 方案的最终选择 6 2 数控直流稳压电源设计 7 2.1 系统总体设计方案 7 2.2 数控直流稳压源总体结构 7 3 数模转换模块设计与实现 9 3.1 芯片方案选择 9 3.2 DAC0832的简介 9 3.3 DAC0832的引脚功能 10 3.4 D/A时序图 11 3.5 DAC0832数模转换模块的设计与实现 11 4 TLC1543模数转换模块设计与实现 13 4.1 TLC154