《毕业设计(论文)-防护罩建模与仿真》.docVIP

2009届分 类 号：单位代码：本科毕业设计 题目:防护罩建模与仿真姓 名学 号　　　随着中国经济的迅速发展，模具已经成为现今工业生产不可或缺的装备，占有着越来越重要的地位。在这样的发展形式下选择模具设计这样一个有意义的毕业设计是一次非常重要的锻炼机会。 本设计是针对冲压模具的设计，设计先根据板件的结构特点及工艺特性进行工艺分析，再结合现今模具生产厂家的具体经验进行结构设计，切实将设计做到能够应用在实际生产中，使模具更具有实用性。 该工件结构特点适宜采用冷冲模进行生产，所以对冷冲压与模具的相关知识进行了简单介绍。拉模是将经过落料工序的材料通过凸凹模的冲压产生塑性变形从而得到板件形状的工序，是模具中重要的组成部分是其他工序的基础。本设计对拉延模的工艺特点、组成、具体工作过程进行了阐述、并对组成模具的部分部件进行了分析。Abstract With Chinas rapid economic development, mold has become an integral part of todays industrial production equipment, occupies an increasingly important position. In this form of development chosen die design such a meaningful graduation project is a very important training opportunity. This vehicle is designed for one blank accesssory die design, according to board first design of the structure and characteristics of a process of analysis, combined with the current mold manufacturer specific experience in structural design, design will be able to effectively applied in practice Production and more practical to die. Parts of the structure of production for use Die, die of cold stamping and the relevant knowledge of the brief. Drawing is to die after blanking the material through the process of stamping die Tuao produce plastic deformation plate shape to receive the process, the mold is an important component of other processes is the foundation. Drawing on the design of the model characteristics, composition, concrete work on the process and formed part of the mold parts were analyzed. Key words：die;blank; cold stamping；process；model characteristics1　绪论 - 5 - 1.1　模具概述 - 6 - 1.1.1　模具的现状及发展 - 6 - 1.1.2　模具先进制造工艺及设备 - 7 - 1.2　冲压模具 - 9 - 1.2.1　冲压模具的概念及特点 - 9 - 1.2.2　冲压模具的分类及结构 - 9 - 1.3　我国冲压模具发展及现状 - 10 - 1.4　课题目的和研究意义 - 11 - 1.4.1　课题目的 - 13 - 1. 4. 2　研究的意义 - 14 - 1.5　方案论证 - 14 - 2　防护罩冲压模具的建模 - 15 - 2.1　设计题目 - 15 - 2.2　冲压工艺与模具建模 - 15 - 2.2.1　冲裁工艺分析 - 15 - 2.2.2　确定工艺方案及模具类型 - 16 - 2.2.3　模具主要参数计算 - 18 - 2.2.4　零件结构尺寸确定 - 21 - 2.2.5　总装配及零件图 - 22 - 3　防护罩冲压模具的仿真 - 23 - 参 考 文 献 - 24 - 谢　辞 - 25 - 1