本科毕业设计---公交车报站器.docVIP

摘 要SPCE061A的基本原理和开发方法，讨论了控制模块、显示系统和存储系统的总体设计思想和实现方案，并且详细阐述了硬件系统和软件系统的设计。硬件系统包括电源电路、控制电路、信息存储电路、显示电路、语音资源存储电路等；硬件驱动程序由开发系统提供的汇编语言库函数来实现。经过调试和仿真运行，使系统最终达到了课题设计的要求。 关键词：单片机，语音处理，LCD显示，SPR4096Abstract With the rapid development of urban traffic, transit buses out for people with a quick and convenient services. But the consensus transit buses stops directly affects its quality of service. Traditional way is by the crew stops artificial stops for its effect, this way poor and working level too big, in many big cities have been eliminated. In recent years, with various pronunciation chip microcomputer technology, can complete combined speech synthesis technology, makes the realization of bus stops device becomes possible, and thus for citizens to provide a more humanized service. Bus application system will not only bring bus enterprises, but also is of image promotion of growth. Benefit This paper introduces a kind of bus stops the system design principle, is put forward to 61 single chip, through 4 * 4 keyboard access external SPR4096 pronunciation chip instruction to control circuit and LCD display hardware design and software design. This system voice timbre, the function is strong, very low cost, is to provide the bus service is a good method. This paper firstly introduces the basic principle and development SPCE061A methods are discussed in control module, display systems and storage system design thinking and realize the overall solution, and illustrates the hardware and software system design. Hardware systems include power supply circuit, control circuit and information storage circuit, display circuit, speech resources storage circuit, etc.; Hardware driver by the development of the system provided assembler language library function to realize. After testing and simulation operation, the system finally achieved the topic design requirements. Key Words：MCU; Speech Processing; LCD display;SPR4096目 录摘 要 I Abstract II 1 引言 1 2 SPCE061A单片机简介 2 3 系统方案 6 3.1 系