《汽车天窗马达检测设备设计-说明书》.docVIP

摘 要 本文是设计一套汽车天窗马达自动检测设备，以满足汽车工业自动化生产的需要。通过设计汽车天窗马达的定位和夹紧方式，使用一面两孔的定位，气缸压紧的方法来实现。设计马达的传动方案，使用一根与马达相连接的输出轴来实现马达的力矩输出。对设备状态、马达工作电流、力矩以及转动位置数据进行检测。运用了FX 系列可编程序控制器（PLC）对设备的动作流程进行控制, 论述了电气控制系统的硬件设计, 控制软件结构以及手动控制程序和自动控制程序的设计。 关键词：天窗马达，传感器，气缸，可编程序控制器 Abstract This is the design of a motor vehicle roof automatic detection equipment to meet the needs of automotive industry automation. Through the design of automobile sunroof motor positioning and clamping methods, using two holes side positioning, cylinder compression method to achieve. Motor drive design program, using a motor connected with the output shaft to achieve the motor torque output. State of the equipment, the motor operating current, torque and rotational position data for testing. Use the FX Series Programmable Logic Controller (PLC) equipment to control the action process. Discusses hardware design of electrical control systems, control software structure and procedure manual and automatic process control design. Keywords: sunroof motor, sensor, cylinder, programmable logic controller 窗体顶端 窗体底端 目 录 1 绪论-------------------------------------------------------------------------------------------------------------------------1 1.1课题来源--------------------------------------------------------------------------------------------------------------1 1.2课题目的、意义--------------------------------------------------------------------------------------------1 1.3国内外发展基本情况---------------------------------------------------------------------------------------------1 1.4本课题设计要求----------------------------------------------------------------------------------------------------2 1.5本章小结---------------------------------------------------------------------------------------------------------------3 2 汽车天窗马达检测设备设计-------------------------------------------------------------------------------3 2.1汽车天窗马达检测设备的总体设计方案----------------------------------------------------------------3 2.2驱动机构的选择---------