试验大纲(目表)ABS.docVIP

6 LAUNCHING AND EMBARKATION APPLIANCES 6.1 LAUNCHING AND EMBARKATION APPLIANCES 6.1.1 LAUNCHING AND RECOVERY APPLIANCES EVALUATION AND TEST REPORT 6.1.1.1 Submitted drawings, reports and documents 6.1.1.2 Quality assurance 6.1.1.3 Visual inspection 6.1.1.4 Static proof load test 6.1.1.5 Operational load test 6.1.1.6 Turning in test 6.1.1.7 Winch brake test 6.1.1.8 Rescue boat launching appliance recovery speed test 6.1.1.9 Hand operation test6.1.1 LAUNCHING AND RECOVERY APPLIANCES EVALUATION AND TEST REPORT Manufacturer Wuxi Dongwu Marine Equipment Co., Ltd System type Serial number Maximum Working Load Maximum Hoisting Load LE60 68kN 45kN Winch type D50S/Z Serial number Date Place Name and signature of surveyor Approval Organization6.1.1.1 Submitted drawings, reports and documents Submitted drawings and documents Status Drawing No. Revision No. date Title of drawingSubmitted reports and documents Status Report/Document No. Revision No. Date Title of report / document6.1.1.2 Quality Assurance Regulations: MSC.81(70) 2/1.1 and 1.2 Except where all appliances of a particular type are required by chapter III of the International Convention for the Safety of Life at Sea, 1974, as amended, or the International Life-Saving Appliance (LSA) Code, to be inspected, representatives of the Administration should make random inspection of manufacturers to ensure that the quality of life-saving appliances and the materials used comply with the specification of the approved prototype life-saving appliance. Manufacturers should be required to institute a quality control procedure to ensure that life-saving appliances are produced to the same standard as the prototype life-saving appliance approved by the Administration and to keep records of any production tests carried out in accordance with the Administration’s instructions. Quality Assurance Standard Used: -ISO9001Quality Assurance Procedure: OKQuality Assurance Manual: OKDescripti