本科毕业设计---基于虚拟仪器的温度测量系统.docVIP

辽东学院本科毕业论文（设计） 基于虚拟仪器的温度测量系统The Design of Temperature Measurement System Based on Virtual Instrument Technology 学 院（系）： 机电学院 专 业： 测控技术与仪器0614110415 指 导 教 师： 赵娜 评 阅 教 师： 完 成 日 期： 2015年4月 辽 东 学 院 Eastern Liaoning University 摘 要 测控技术跟随时代的发展，更数字化自动化，智能化网络化美国提出，。社会的工业中不能缺少，尤其是在恶劣环境下远程系统。两部分，上位机部分由的检测界面进行开发，可以对温度变化曲线进行直观的观察还可以在的情况下，利用的温度数据对比设定值来提示温度报警下位机部分由读取数据，利用上位机分析。对不人进入场所的测量工作问题进行了有效的解决。使接数据采集卡的数据就可以和通信，不仅硬件的成本也灵活性上得到加强。 LabVIEW； The Design of Temperature Measurement System Based on Virtual Instrument Technology Abstract With the continuous development of measurement and control technology, and its technology is toward automation, intelligent, digital and network development. The company put forward the NI software is instrument concept, so LabVIEW arises at the historic moment. Detection in todays society in many of the industry with or lack of, some environmental bad place is also can not get away from remote detection system. This design is solved some heavy industry, pharmaceutical industry, etc in between some of place is not fit for human in, still need to temperature detection problem. This design has two sides, the PC is in the PC platform using the LabVIEW software development testing interface, and intuitive observe temperature curve, according to need to also can be in the form of form to Excel, save detection of historical data, according to the real-time data acquisition data and the temperature of the set value comparison, tip temperature alarm; The machine is through a single chip computer 89 E52 read temperature data, through the RS-232 turn USB interface, move as a machine for analysis. This design is used to RS232 serial line USB for PC and a machine under the communication. The communication module LabVIEW NI-VISA in V3.0 version began after support USB serial ports, make the next place machine and can not through LabVIEW