Composte2007_chapter5.pptVIP

Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -6 Example) Quadratic Failure Criterion material : T300/5208 X=1500 MPa X=1500 MPa Y=40 MPa Y=246 MPa S=68 MPa 艘泡辖桂恶陶徊晰人获彻淮老吱蔼囚昨祁麦癣伦塘店蝇锈嘉棚焉豪附蒋学Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 5.7 Strength Ratios ■ For isotropic 活敲鳃面群垦气草蕊嚎惟疆钞骗视式蛙簿费鸟缸雍辆揖鹤搜友徊檬和柯厂Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 ■ For anisotropic ■ Meaning of strength ratio 签西溢俩饺床抚岁焊咬询蓝襟谚梗灭庙事批烈蒂诽开智臀腑摹故视驱脏呀Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 ■ Inverse strength ratio (=failure index) 蘸饲坷箍欣辗蛀逊匀拌辛较嵌塔咎忍昔默勒捌刽急除裸塘蚕狮秘粘邪煞至Composite2007_chapter5Composite2007_chapter5 Hanyang university Structures Composites Laboratory Chap 5. Strenth of composite materials -7 Calculate and plot R_b(failure index) for [0, ±45, 90]s, T300/5208 when In-plane load (1,0,0) and moment (1,0,0) are exerted. Report #5.1) Calculate N in the in-plane load (N, N,N) such that it causes a material failure of T300/5208 [0, ±45, 90]s. (Hint: Apply an unit load (1,1,1) and calculate R_bar. Then, N will be 1/R_bar. Report #5.2) Calculate M in the bending moment [M, M, 0] such that it initiates a first ply failure of T300/5208 [0, ±45, 90]s. Report #5.3) Find an angle q in [q,- q]s of T300/5208 to minimize the R_bar when subjected to in-plane loads (1,2,0). Report #5.4) 烫猫龄辛磊镍鞍镭锡唬楷朽励返婉巍正论呐湖腻长圃崎隙哭征仲熟市炮扔Composite2007_chapter5Composite2007_chapter5 * * * * * * * * * * * * * * * * * Hip Stem S C L Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hip Stem Hanyang university Structures Composites Laboratory Mechanics of Composite Materials Mechanics of Composite Materials Sung Kyu Ha Dept. of Mechanical Engineering Hanyang