SM001属材料抗硫酸露点腐蚀性能的研究.docVIP

安徽理工大学 毕业论文 金属材料抗硫酸露点腐蚀性能的研究 学 院 机械工程学院 年级专业 过程装备与控制工程03-1 学生姓名 李 坤 指导教师 伍 广 专业负责人 答辩日期 摘要 Abstract Metal corrosion in sulfuric aeid edw point is a common and very serious harm go the corrosion forms, in a wide range of production in all aspects of life, especially in some specific process unit operation equipment middle.low-temperature corronsion dew point in the general industrial rurnace, boiler, fuel saving edvices, air preheater, heat exchangers, tower refrigeration systems, dust, garbage incineration furnace, sintering furnace flue and chimney acid plant and the wind tunnels of hypothermia sife, yes containing gurnace flue and chimney acid plant and wind tunnels of hypothermia site, yes containing acidic gases produced by the condensation of cold treatment from the local cold drinks along with the liquid in the device, lesding to a very serious material corrosion. Based on the corrosive sulfuric acid dew point to explore the causes, sulfuric acid dew point understanding the theory of corrosion causes specific location, the use of metal materials, the metal material performance requirements, metals and foreign material to sulfuric acid corrosion resistance of the status quo, the latest research results Metal and sulfuric acid dew point corrosion resistance future development direction Materials made of metal corrosion resistant sulfate study specific direction. The technical route first through an analysis of different materials sulfuric acid corrosion resistance properties of dew point difference, understand the different metal materials for sulfuric acid dew point corrosion resistance properties. By analyzing different metal materials analysis ofthecompositionAggregate upgrade sulfate resistant metal materials can be corrosive to the dew point, and the original based on metallic materials against corrosion sulfuric acid dew point of the newmethods and n