沈阳变压器集团有限公司联合厂房桩基础工程设计.doc

摘　　　要 本次设计题目来源于沈阳特变电工联合厂房基础工程。设计首先将调研中收集到的沈阳特变电工联合厂房的地质勘察报告、上部建筑结构情况及相关技术的国内外资料进行综合分析，严格遵循《建筑桩基技术规范》(JGJ94-94)并结合地方经验初步拟定了沉管灌注桩@120。承台底面埋深为1.5m。桩基础的A承台平面尺寸为3×1.2m2，B承台平面尺寸为3×3m2。螺旋钻孔混凝土压灌桩桩基础含税工程造价821378.38元，相比可知，优选方案较其他方案工程造价将近节省10万元，基本达到优化设计的目的。 最后，根据优化方案完成了铁芯车间桩基础工程的施工技术方案和工程质量检测的设计工作。在设计的主要工作及结论部分，本人对设计过程中所获得的主要数据成果进行了分析总结。另外，此次设计的最大特点是将整个设计阶段遇到的最为重要的几个问题单独提出并分析进而表述了自己的见解。 关键词 沉管灌注桩The design of topic is from the Shenyang joint special variable electrical plant pile foundation works The design will first analysize the collected materials of the Geological Survey report of Shenyang special variablely electrical Joint plant, the upper structure information and domestic and foreign materials of related technology.And the design is abide by the Construction Pile Technical Specifications (JGJ94-94) strictly combined with local experience in the initial development of the three pile foundation design of immersed tube piles, screw drilled grout-cast-in-situ pile and precast reinforced concrete piles Secondly,this programme are based on the preliminary design, and calculate the amount of their works and their budget. Then I will compare these three programmes in three ways of technical feasibility, economic rationality and reliability analysis.At the end of that ,I choose screw drilled grout-cast-in-situ pile foundation as the best programme Then I will design and calculate it.Specific parameters and optimize the budget estimate summary:Choose the fifth layer of sand to pile-bearing stratum.Length for the L=20m.Pile Drive for φ600mm,using C25 pile of concrete, pile Zhujin for 8φ18, stirrups forφ8@120.By the underside depth to 1.5m.A pile foundation for Taiwan Plane size of 3×1.2m2,B flat cap size of 3×3m2.Spiral bored concrete piles pressure irrigation works based on the total cost of tax: 821378.38yuan.Compares may know,the optimal plan will compare other plan building cost of projects nearly to save 100,000Yuan.From that we know the design have basically achiev