欧四欧五发动机排放培训案例.pptVIP

Heavy Duty Engine emissions Euro 4/5重型车用发动机排放 欧4/欧5 FPT “FPT” is FIAT POWERTRAIN TECHNOLOGIES FIAT动力总成技术 It is a company including in a single organization all the engine driveline activities of the Fiat group worldwide是FIAT集团全世界包括所有发动机和动力传动系统的独立的机构 Fiat automotive FIAT汽车 IVECO Others…其它 It is developing and producing 正在开发和生产 Diesel and gasoline engines 柴油和汽油发动机 From 1,0 liters up to 40 liters 从1.0L到40L For 用于 Cars轿车 Trucks卡车 Agricultural and earth moving农业和工程机械 Marine船用 Power generation发电 ….等等 Euro 3 Registration Europe 欧洲欧3注册 Euro 4 Registration step 1 Europe 欧洲欧4第1阶段注册 Euro 4 Registration step 2 Europe欧洲欧4第2阶段注册 Euro 5 Legislation Europe 欧洲欧5法规 Legislation summary 法规概要 Durabilty requirements 耐久性要求 Present European Euro 4 legislations specifies that当前欧4法规说明 A minimum durability of the engine in terms of emissions legislation conformity must be guaranteed by the manufacturer (limit depending on vehicle class / size)排放法规中的发动机最低耐久性符合性由制造厂保证(限值取决于车辆类型/尺寸) The same criteria applies to the after treatment system标准同样适用于后处理系统 No specific demonstration of this durability is required. 没有明确的耐久性”试验实例”要求 It is expected that future European legislation will include a durability “demonstration” equivalent to the USA EPA approach未来的欧洲法规将包含耐久性”试验实例”,等同于美国环保署方法 In-use compliance – 1 在用车符合性-1 The verification of conformity to emission standards of vehicles in real use is very critical on HD applications.检查重型在用车辆排放符合性是非常复杂的. As NOx and particulate emissions are very low at low engine load, any “conformity” test must be performed with the engine under high load. This requires either因为在发动机低负荷时NOx和颗粒排放非常低,任何符合性测试必须在发动机高负荷时进行. Emission measurements on vehicle in operation on road 车辆排放在道路上运转 Use of a roller test bed (for a truck, a very heavy / expensive device)使用转鼓试验台(对于卡车,非常重/装置昂贵) Dismounting the engine (and the after treatment system) from the vehicle and installation on an engine test bed从车辆上拆下发动机(和后处理系统)并安装到发动机排放试验台上. In-use compliance – 2 在用车符合性-2 European